Hi All
I am new to the forum and after some help- please. My daughter has passed her test and is driving our 2009PoloE- 1.2 petrol. She has a dashcam (Nextbase 112)and I am trying to hardwire it. I have successfully run the cable and tried to connect via the standard Nextbase hardwire kit. It comes with a ‘plug in’ fuse adaptor.
It says to plug into a 5amp fuse yet the only 5amps I can see are all small fuses and not the larger type on the bottom set of fuses.
Would anyone know which fuse I can plug this into please. I had though the cigarette one but that’s a 15amp.
1996 Polo 1.2 Hardwire Dashcam-Fuse info please
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 1996 Polo 1.2 Hardwire Dashcam-Fuse info please
Welcome
Can you post a photo up of what you have? Normally they have a holder that holds the original fuse and an additional fuse for the dashcam
Can you post a photo up of what you have? Normally they have a holder that holds the original fuse and an additional fuse for the dashcam