iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by ciclo »

ow...
Please keep us posted, this is very interesting.
Remember to code BCM Byte29 Bit6 if use the other LIN (b36?) ... you already know. :wink:
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

Yes I remember from the other experiments. I'll inform you. Do you have any Erwin pdfs for this Ibiza?
User avatar
til3tsio
Getting There!
Posts: 54
Joined: Thu Feb 11, 2021 10:53 pm
Drives: Seat Toledo KG
Location: Greece

Re: iichels Polo 6R 1.2TDI Rosa Line Bluemotion

Post by til3tsio »

iichel wrote: Sat Mar 03, 2018 2:16 pm for my Golf 7 light switch, the back of the 5ND switch was a 1:1 swap, I can still use the 8E0 connector 8)
I know its been a while but do you remember what part numbers you combined ?
If i am not mistaken the 5ND switches has screws on the back of the switch but the 5G0 has locking tabs.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Rosa Line Bluemotion

Post by iichel »

til3tsio wrote: Thu Apr 01, 2021 1:14 pm
iichel wrote: Sat Mar 03, 2018 2:16 pm for my Golf 7 light switch, the back of the 5ND switch was a 1:1 swap, I can still use the 8E0 connector 8)
I know its been a while but do you remember what part numbers you combined ?
If i am not mistaken the 5ND switches has screws on the back of the switch but the 5G0 has locking tabs.
I don't remember but I had a look, it was 5GG941431D. Which is probably an Aliexpress part, but can't say for sure.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

MFSW to T73b/36 + byte 29 bit 6 = fail too with 4B in the gateway installation list.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

ciclo, do you know anything about the MFSW codings (so the E221 module itself) for 5K0/6C0/5G0 buttons?

So far I've only been able to identity byte 0 bit 0 (DSG paddles installed) and bit 7 (PQ/MQB platform) in the 5G0 wheels.
Byte 0 bit 5 seems to be 1 all the time, while bit 6 seems to be 0 all the time.
I haven't discovered yet why sometimes the values are FF FF for byte 1/2 or 00 00. There doesn't seem to be a pattern.
dominis23
New
Posts: 6
Joined: Wed May 13, 2020 8:57 am
Drives: POLO 6R
Location: POL

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by dominis23 »

iichel wrote: Thu Feb 11, 2021 1:27 pm I took it from scirocco 1k8
I still have a question if you did parameterization of the amplifier. If so, you did vcp or odis
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

No I did not.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by ciclo »

iichel wrote: Mon Apr 05, 2021 8:14 pm ciclo, do you know anything about the MFSW codings (so the E221 module itself) for 5K0/6C0/5G0 buttons?

So far I've only been able to identity byte 0 bit 0 (DSG paddles installed) and bit 7 (PQ/MQB platform) in the 5G0 wheels.
Byte 0 bit 5 seems to be 1 all the time, while bit 6 seems to be 0 all the time.
I haven't discovered yet why sometimes the values are FF FF for byte 1/2 or 00 00. There doesn't seem to be a pattern.
Some time ago I did a study about it, but now I can't find the file ... sorry. :oops:
The important coding is in Byte0, ... what you have already mentioned - DSG and platforms -, and for the speed control system buttons - Yes/no: CCS, ACC, and other small differences in button configuration -.

Also some time ago I tested FF and 00 for Bytes 1 and 2 on the 6R and also in my wife's Golf for the sports steering wheels that I installed and there were no differences in performance, nor were there any faults in the Autoscan.
I have normally found that FF was used for sports steering wheels and 00 for standard steering wheels but it doesn't seem to be relevant.

In MQB, these modules are currently self-coding when installed.
Davidek66
New
Posts: 1
Joined: Thu Apr 15, 2021 1:08 pm
Drives: 6r 1.6tdi
Location: Poland

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by Davidek66 »

Love the white LED conversion inside 🥵 do you know which led’s you have used for the buttons like ESP, Heated Window etc? Been trying loads of LED’s but cannot get it to work.. or did you use any resistors?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

I'm really sorry but I don't remember
dominis23
New
Posts: 6
Joined: Wed May 13, 2020 8:57 am
Drives: POLO 6R
Location: POL

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by dominis23 »

Hi you are able to send me a flash from the amplifier (5C6035456C). Unfortunately, vcp support is not able to help me. greetings
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

Today my new Mirabeau wheels received their TPMS sensors too. Great thanks to my local tire service company. They always help me well with alignment and tire changes.
PXL_20210424_074527699.jpg
PXL_20210424_074527699.jpg (2.55 MiB) Viewed 2229 times
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

since you're all taking such great interest in my project :mrgreen: :mrgreen:

Rear Polo AW 'Polo' text --> 6N5853687 2ZZ
Attachments
2021-04-29 09.15.46.jpg
2021-04-29 09.15.46.jpg (1.78 MiB) Viewed 2127 times
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels Polo 6R 1.2TDI Bluemotion --> OEM++ R-Line conversion

Post by iichel »

1.2 TDI engine :)
IMG-20210430-WA0003.jpg
IMG-20210430-WA0003.jpg (202.04 KiB) Viewed 2552 times
Post Reply