Polo 6R ABS CODING

[habib_123]

Hi,

Can anyone post their Polo 6R ABS Coding for me. I have lost mine.

I own a VW Polo 6R 2011 1.2 TDI RHD 5 Door.

Thank You!!

This is the Auto-Scan:

VCDS Version: Release 15.7.4 (x64) Running on Windows 8.1 x64
Data version: 20160216
http://www.Ross-Tech.com

Friday,20,May,2016,21:11:49:33719

Chassis Type: 6R (6N0)
Scan: 01 03 08 09 10 15 17 19 25 2E 37 44 56 77

VIN: WVWZZZ6RZCU015153 Mileage: 48200km-29950miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Not registered 0011
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
77-Telephone -- Status: Malfunction 0010

-------------------------------------------------------------------------------
Address 01: Engine (J0000-CFWA) Labels: 03P-906-021-CFW.clb
Part No SW: 03P 906 021 A HW: 03P 907 425 A
Component: R3 1.2 DCM3.7 H06 8411
Revision: 11002001 Serial number:
Coding: 00114010002500080000
Shop #: WSC 31414 790 50316
ASAM Dataset: EV_ECM12TDI03103P906021A 001010
ROD: EV_ECM12TDI03103P906021.rod
VCID: 26438C535964BA0E24-8072

No fault code found.
Readiness: 1110 1000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 6R0-907-37x-ESP82.clb
Part No SW: 6R0 907 379 AK HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
Revision: --------
Coding: 000000000000000000000000000000000000
Shop #: WSC 31414 790 31414
VCID: 071DE1D7B2AE83063F-8052

4 Faults Found:
03306 - Coding Not Valid
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 4
Reset counter: 96
Mileage: 48207 km
Time Indication: 0
Date: 2016.05.19
Time: 21:04:03

Freeze Frame:
Hex Value: 0x0002
Hex Value: 0x0002
Hex Value: 0x12E7
Hex Value: 0x259D
Hex Value: 0x00FF
Hex Value: 0x7F81
Hex Value: 0x7FF8

01042 - Control Module; Not Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 56
Mileage: 48207 km
Time Indication: 0
Date: 2016.05.19
Time: 21:08:05

Freeze Frame:
Hex Value: 0x0007
Hex Value: 0x0002
Hex Value: 0x1213
Hex Value: 0x149D
Hex Value: 0x00FF
Hex Value: 0x7F7F
Hex Value: 0x7F00

00778 - Steering Angle Sensor (G85)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 0
Fault Frequency: 1
Reset counter: 56
Mileage: 48207 km
Time Indication: 0
Date: 2016.05.19
Time: 21:08:05

Freeze Frame:
Hex Value: 0x0007
Hex Value: 0x0002
Hex Value: 0x1251
Hex Value: 0x1B9D
Hex Value: 0x00FF
Hex Value: 0x7F7F
Hex Value: 0x7F00

00493 - ESP-Sensor Unit (G419)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 0
Fault Frequency: 1
Reset counter: 56
Mileage: 48207 km
Time Indication: 0
Date: 2016.05.19
Time: 21:08:05

Freeze Frame:
Hex Value: 0x0007
Hex Value: 0x0002
Hex Value: 0x12E1
Hex Value: 0x209D
Hex Value: 0x00FF
Hex Value: 0x7F7F
Hex Value: 0x7F00

End-------------------------(Elapsed Time: 02:45)--------------------------

[ciclo]

Look in the logs folder VCDS program, If you have made other autoscan...

The ABS coding is related to VIN number, so perhaps the only valid encoding is the original. (I do not know for sure)

How you lost this coding?

[habib_123]

Hi Ciclo,

When I bought the car in Feb 2015, it was already like that. The previous owner did something to it. I was hoping someone code could work out the coding or paste theirs with the same spec as mine.

I have the tire pressure sensor installed as well.

[ciclo]

210224E3416E00B7842624E782D400521300 (according to your VIN), but Byte15 (52 Hex) is for LHD.

[ciclo]

210224E3416E00B7842624E782D400521300 (according to your VIN), but Byte15 (52 Hex) is for LHD.

Maybe Byte15 is 92 according to http://vwclub.co.za/forum/viewtopic.php ... 9#p1694595

Try with 210224E3416E00B7842624E782D400921300

[habib_123]

Hi Ciclo,

You have outdone me again. i swear you are a genius with the new polos. I will try the coding later on and I will tell you, if it has worked.

Thanks!!!!

[iichel]

True that.

For reference, 2010 Polo 6R Bluemotion

VIN: WVWZZZ6RZBY179829
Address 03: ABS Brakes (J104) Labels: 6R0-907-37x-ESP82.clb
Part No SW: 6R0 907 379 AK HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
Revision: --------
Coding: 210224E3417400BB842D24E482DA00521300
Shop #: WSC 00788 648 00255
VCID: 8717035C32D37526559-80D2

[habib_123]

Hi iichel,

Is that coding for LHD or for RHD?

And do you have the TPMS installed?

Thanks

[iichel]

this is is a LHD polo. it has TPMS

[habib_123]

Thanks. I will try that as well but change byte 15 to RHD.

[ciclo]

You probably have to do the basic setting of the sensors indicated in autoscan.

We wait the results. (I hope that lady luck be your ally )

Perhaps the next link will also help you http://forums.ross-tech.com/showthread. ... ule-please (Byte16 must be 13Hex)

[habib_123]

Hi Ciclo,

My brother took the car to London today. He will be back within a few hours and then I will try it. I hope it works. How do I do settings of the sensors?

Thanks

[ciclo]

I think this is the best procedure http://wiki.ross-tech.com/wiki/index.ph ... ic_Setting

But keep in mind the group 63 according to this http://forums.ross-tech.com/showthread. ... #post11788

When you try to do it, everything will be clearer for you. (or not )

[habib_123]

Thanks Ciclo,

I understand most of it. I have not tried the coding yet. I'm probably gonna have to do it tomorrow as it's 8pm here and my brother will be back late. I will notify you when i've done it. But thanks for these links. They are VERY useful.

[ciclo]

The coding is based on your VIN number, so is very likely to work.

You have to do as many attempts as necessary to do the basic settings, sometimes it takes some time to it react. Be patient with that.

Start over each indicated process when you do not get the results.
- Exit from ABS unit, enter again, writes the security access (again), basic settings etc...

When everything is OK:
Inflate the tires to the correct pressure and check the tire pressure monitoring. (user manual)

Good luck for tomorrow!