retrofitting kessy to the Polo 6R

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: retrofitting kessy to the Polo 6R

Post by ciclo »

shanny wrote: Sun Nov 10, 2019 12:28 pm Nope =(

I always got "Forbidden. Contains contacts. Message seems to be spam. " Error. But it is the same content like in the picture.
Try it by deleting the ross-tech web address from the autoscan text file, then copy and paste the autoscan text.

:?:
User avatar
ag69
Silver Member
Posts: 429
Joined: Fri May 26, 2017 10:39 am
Drives: 1.2TSi 77Kw 7DSG
Location: Earth

Re: retrofitting kessy to the Polo 6R

Post by ag69 »

pardon me to ask such basic question here.

could you please help me with pin for start stop button (illumination)
This is how button is :
engine-start-stop-5ND959839.png
engine-start-stop-5ND959839.png (117.39 KiB) Viewed 3692 times
This is the connector:
connector.png
connector.png (61.09 KiB) Viewed 3692 times
It has 4 pins.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: retrofitting kessy to the Polo 6R

Post by iichel »

1 is GND
2 is the illumination
3 and 4 are the starter signals to the ELV
User avatar
ag69
Silver Member
Posts: 429
Joined: Fri May 26, 2017 10:39 am
Drives: 1.2TSi 77Kw 7DSG
Location: Earth

Re: retrofitting kessy to the Polo 6R

Post by ag69 »

Thank you iichel.
My illumination project unlike you (all greats full fledged system) is on ;)
shanny
New
Posts: 5
Joined: Sat Nov 02, 2019 8:20 am
Drives: VW UP
Location: Germany

Re: retrofitting kessy to the Polo 6R

Post by shanny »

ciclo wrote: Sun Nov 10, 2019 6:08 pm
shanny wrote: Sun Nov 10, 2019 12:28 pm Nope =(

I always got "Forbidden. Contains contacts. Message seems to be spam. " Error. But it is the same content like in the picture.
Try it by deleting the ross-tech web address from the autoscan text file, then copy and paste the autoscan text.

:?:

Now it works, I had nothing changed.

-------------------------------------------------------------------------------
Adresse 01: Motorelektronik (J623-CHYA) Labeldatei:. 04C-906-020-CHY.clb
Teilenummer SW: 04C 906 020 D HW: 04C 907 309 A
Bauteil: 1.0l R3 MPI H01 6464
Revision: U8H01--- Seriennummer:
Codierung: 00110012022401000000
Betriebsnr.: WSC 84227 123 22067
ASAM Datensatz: EV_ECM10MPI01104C906020D 001011
ROD: EV_ECM10MPI01104C906020D.rod
VCID: 1C31EEC817A8A8AA21-8048

Kein(e) Fehlercode(s) gefunden.


-------------------------------------------------------------------------------
Adresse 05: Zugangs-/Startber. (J518) Labeldatei:| DRV\5K0-959-434.clb
Teilenummer SW: 5K0 959 434 A HW: 5K0 959 434 A
Bauteil: VWKESSYPQ35GP 085 0802
Revision: 00085000 Seriennummer: 0145973523
Codierung: 030C0C
Betriebsnr.: WSC 84227 123 22067
ASAM Datensatz: EV_KESSY_PQ35GP A01018
ROD: EV_KESSY_PQ35GP.rod
VCID: 3326CBF79A871BD754-8066

Kein(e) Fehlercode(s) gefunden.


-------------------------------------------------------------------------------
Adresse 09: Zentralelektrik (J519) Labeldatei:. DRV\7E0-937-BCM-V1.clb
Teilenummer SW: 7E0 937 090 A HW: 7E0 937 090
Bauteil: BCM PQ25 Max4 H80 0736
Revision: B9080001 Seriennummer: 0771 251150512
Codierung: 64B8293868E1060093280FF42EE806E177C4606E60012CC020B400420940
Betriebsnr.: WSC 84227 123 22067
VCID: 291A299F404B5107EE-807C

Subsystem 1 - Teilenummer: 5K7 955 559 B Labeldatei: DRV\5K7-955-559.CLB
Bauteil: RLS 060416 03 37 0059
Codierung: 0228DD

Subsystem 2 - Teilenummer SW: 6R0 959 802 CH HW: 6R0 959 802 CH Labeldatei: 6R0-959-802.CLB
Bauteil: J386__TSG_FT 003 9610
Seriennummer: KU0KU016061441670503
Codierung: 0200A1

Subsystem 3 - Teilenummer SW: 6R0 959 801 CF HW: 6R0 959 801 CF Labeldatei: 6R0-959-801.CLB
Bauteil: J387__TSG_BT 003 9610
Seriennummer: KU0KU013061441648403
Codierung: 1200A1

Subsystem 4 - Teilenummer: 1K8 951 171 A
Bauteil: DWA-Sensor 00 001 0103
Codierung: 000000

Subsystem 5 - Teilenummer: 1K8 951 171 A
Bauteil: DWA-Sensor 00 001 0103
Codierung: 000000

Kein(e) Fehlercode(s) gefunden.



-------------------------------------------------------------------------------
Adresse 17: Schalttafeleinsatz (J285) Labeldatei:| DRV\5K0-920-xxx-17.clb-SRI1
Teilenummer SW: 5C5 920 870 HW: 5C5 920 870
Bauteil: KOMBI H08 0014
Revision: X0008003 Seriennummer:
Codierung: 110A21
Betriebsnr.: WSC 84227 123 22067
ASAM Datensatz: EV_KombiUDSMM9RM10 A04305
ROD: EV_KombiUDSMM9RM10_A04_VW12.rod
VCID: 679E6FA79EDFA77738-8032

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 19: Diagnoseinterface (J533) Labeldatei:. DRV\7E0-909-901.clb
Teilenummer SW: 7E0 909 901 HW: 7E0 937 090
Bauteil: GW-K-CAN TP20 H80 0736
Revision: B9080001
Codierung: 502003
Betriebsnr.: WSC 84227 123 22067
VCID: 689C6C9B9BC1A80F31-803C

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 25: Wegfahrsperre (J334) Labeldatei:| DRV\5K0-920-xxx-25.clb
Teilenummer SW: 5K0 953 234 HW: 5C5 920 870
Bauteil: IMMO H08 0014
Revision: X0008003 Seriennummer:
Codierung: 000007
Betriebsnr.: WSC 00066 000 00150
ASAM Datensatz: EV_ImmoUDSMM9RM10 A01301
ROD: EV_ImmoUDSMM9RM10_VW12.rod
VCID: 6A9816938DCD9A1F27-803E

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 2B: Lenksäulenverrieg. (J764) Labeldatei:* DRV\5K0-905-861.clb
Teilenummer SW: 5K0 905 861 A HW: 5K0 905 861 A
Bauteil: ELV-PQ35 H20 0230
Revision: 00000000 Seriennummer: 11000086925002
Codierung: 4100000000000000
Betriebsnr.: WSC 84227 123 22067
ASAM Datensatz: EV_ELVMarquMPVW36X A01001
ROD: EV_ELVMarquMPVW36X.rod
VCID: 2E10DA8371A5363F3B-807A

Kein(e) Fehlercode(s) gefunden.
vento2013
Getting There!
Posts: 72
Joined: Fri Mar 02, 2018 8:44 am
Drives: 6R Polo(Vento)1.6TDi, Skoda Fabia 1.2MPi
Location: In

Re: retrofitting kessy to the Polo 6R

Post by vento2013 »

Hi, iichel,

Will you please post some pictures of Start button with Scirocco trim: 1K8 858 599 A
and steering column switch VW Up 1S0 959 503 x

after KESSY installation
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: retrofitting kessy to the Polo 6R

Post by iichel »

I'm sorry but I cannot provide since the 1S0 stalks are no longer in there. I have the 2Q0 stalks from the new Polo with 6C0 slip ring (without G85).
vento2013
Getting There!
Posts: 72
Joined: Fri Mar 02, 2018 8:44 am
Drives: 6R Polo(Vento)1.6TDi, Skoda Fabia 1.2MPi
Location: In

Re: retrofitting kessy to the Polo 6R

Post by vento2013 »

iichel wrote: Wed Nov 27, 2019 1:27 am I'm sorry but I cannot provide since the 1S0 stalks are no longer in there. I have the 2Q0 stalks from the new Polo with 6C0 slip ring (without G85).
:D

Ok. will you please share picture with Polo stalk. just wanted to see how it looks!

Earlier you said you have to install 1S0 stalk so asked! :)
vento2013
Getting There!
Posts: 72
Joined: Fri Mar 02, 2018 8:44 am
Drives: 6R Polo(Vento)1.6TDi, Skoda Fabia 1.2MPi
Location: In

Re: retrofitting kessy to the Polo 6R

Post by vento2013 »

also wanted to see how you managed height and reach adjust lever
vento2013
Getting There!
Posts: 72
Joined: Fri Mar 02, 2018 8:44 am
Drives: 6R Polo(Vento)1.6TDi, Skoda Fabia 1.2MPi
Location: In

Re: retrofitting kessy to the Polo 6R

Post by vento2013 »

Hi, iichel,

found full kit of KESSY, seller says full kit is new, he also has used ELV and KESSY module everything else new as an option for less price. attaching picture too.

Kessy module 5K0959434E

Electronic steering lock 5K0905861C

Full wiring kit

found a guy who has VVDI and ODIS with some experience.

So wanted to know PQ 35 wiring kit can be used?

Please guide!
Attachments
TB2Ke0am9_I8KJjy0FoXXaFnVXa_!!1861182755.jpg
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: retrofitting kessy to the Polo 6R

Post by iichel »

Yes, the wiring is identical between PQ25 and PQ35 for the antenna and ELV and Kessy module.
You need to improvise in how to connect relays (+15, +75, converter box).
vento2013
Getting There!
Posts: 72
Joined: Fri Mar 02, 2018 8:44 am
Drives: 6R Polo(Vento)1.6TDi, Skoda Fabia 1.2MPi
Location: In

Re: retrofitting kessy to the Polo 6R

Post by vento2013 »

Ok.


What is converter box?

Apart from above image what are the other parts I need. Please let me know. So I can source them too.
Robbo770
Bronze Member
Posts: 109
Joined: Sat Mar 14, 2020 1:56 am
Drives: Polo SEL 1.4 tdi 2014
Location: Scotland

Re: retrofitting kessy to the Polo 6R

Post by Robbo770 »

Hi iichel,

Is this upgrade able on a 6C, or completely different due to bcm?
vento2013
Getting There!
Posts: 72
Joined: Fri Mar 02, 2018 8:44 am
Drives: 6R Polo(Vento)1.6TDi, Skoda Fabia 1.2MPi
Location: In

Re: retrofitting kessy to the Polo 6R

Post by vento2013 »

vento2013 wrote: Fri Jun 05, 2020 7:17 pm
What is converter box?

Apart from above image what are the other parts I need. Please let me know. So I can source them too.
BUMP :|
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: retrofitting kessy to the Polo 6R

Post by iichel »

vento2013 wrote: Thu Jun 11, 2020 1:41 pm
vento2013 wrote: Fri Jun 05, 2020 7:17 pm
What is converter box?

Apart from above image what are the other parts I need. Please let me know. So I can source them too.
BUMP :|
I don't have the time to look into this in detail. I'll share my google drive folder with all the information i found:
https://drive.google.com/drive/folders/ ... sp=sharing
I hope you can find whatever you need in this.
Robbo770 wrote: Sat Jun 06, 2020 6:42 pm Hi iichel,

Is this upgrade able on a 6C, or completely different due to bcm?
It's completely different from a 6R. I know kessy is available in the 6C-based Fabia. But I don't know how to do this for the Polo 6C.
Post Reply