Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
Benzinkopf did a great job in describing it in great detail it works like a charm
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
Hello Benzinkopf,
congrats for your retrofit!
can I ask an info?
I bought the same radars of yours and an Audi button too, but looking at Elsa, for the oem T5 button diagram exists only (excluding the grounds) connection for switch and positive for button back-light. For Audi buttons instead exists a additional positive for the status led, piloted directly from the master radar.
Where have you connected the status led of q7 button?
Thank you mate
congrats for your retrofit!
can I ask an info?
I bought the same radars of yours and an Audi button too, but looking at Elsa, for the oem T5 button diagram exists only (excluding the grounds) connection for switch and positive for button back-light. For Audi buttons instead exists a additional positive for the status led, piloted directly from the master radar.
Where have you connected the status led of q7 button?
Thank you mate
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
I solved it.zaserty82 wrote: ↑Thu Nov 26, 2020 8:15 pm Hello Benzinkopf,
congrats for your retrofit!
can I ask an info?
I bought the same radars of yours and an Audi button too, but looking at Elsa, for the oem T5 button diagram exists only (excluding the grounds) connection for switch and positive for button back-light. For Audi buttons instead exists a additional positive for the status led, piloted directly from the master radar.
Where have you connected the status led of q7 button?
Thank you mate
What is the security access code for enable "Analisys 1" into adaptations?
Thank you
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
Can you perhaps tell us where the extra wire goes to?
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
Sure,
Additional positive wire for status led of audi button goes on pin3 of master radar.
I followed audi q3 diagram for button, but i think all master radars, based on hw ver 4H0907566F (like 7E0907566C), have the same pin-out.
Additional positive wire for status led of audi button goes on pin3 of master radar.
I followed audi q3 diagram for button, but i think all master radars, based on hw ver 4H0907566F (like 7E0907566C), have the same pin-out.
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
For enable "Analysis 1" in adaptations is necessary to use 20103 like security access code in vcds
-
- Gold Member
- Posts: 859
- Joined: Wed Apr 02, 2014 4:01 pm
- Drives: 1.2TSI 105HP DSG7
- Location: Malaysia
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
Hi. I'm really sorry. Been busy without a Laptop and the forum do not support Tapatalk mobile apps anymore hence I missed a lot. Great that you found what you are looking for.Sorry again.
Re: Lane Change Assist (Side Assist) Installation to Polo 6R 2012 1.2TSI 77kW RHD
Also possible on the polo 6c ?