some errors after upgrading 1S0937087D bcm to 1S0937090F

[H2Deetoo]

Trust me, I'm a large fellow and my hand, fingers, neck and back hurt like h*ll.
But once you start this adventure (started this BCM swap simply for MFSW retrofit) you simply cannot stop
And I did it one part at a time, first just the BCM, then some power signals, then low beam, etc.etc.
so I spread it over a long period of time (also because of some health issues) ..

But now since it's finished it gives a good feeling.
And because it's my wife's UP ... if the wife is happy, everyone is happy

Respect to the support from this forum as well.
I couldn't have done (and wouldn't have known all this) without it!


Thanks again,
H2Deetoo

[iichel]

Perhaps we should do a meeting sometime, lol.

[H2Deetoo]

When you finish a bcm max retrofit in that UP we'll meet

[dltpring26101996]

Hi, I have a 2015 VW High Up.

I'm going to have the BCM swapped to accommodate Cruise Control.

The car already has a clutch switch. Also has the hill start assist and TPWS. The headlight switch is the large connector type.

I do not wish to have auto lights.

The BCM currently in my car is 1S0 937 086D and the one I will be having installed is 1S0 937 090D

Please let me know if there are any additional changes that will need to be made to my car

[iichel]

Please let me know if there are any additional changes that will need to be made to my car

About the same as described in this topic.