VCP
ODIS-E
VCDS
---
ODIS-E
4B + 19 Coding BUS Master
---
VCDS
Before I start posting the data of the txt files I made for my wife's Golf I would like to show you this image:
Note: image from when I installed the mirror for HBA, with original BCM, not the current one.
The reason is because each Golf has a specific equipment and the data that I am going to post is
the work I did in my wife's Golf.
The info will be useful for many who do this retrofit but I recommend comparing data with other Golfs that also did it and posted the data that was applied to their cars. Also search for online data from vehicles with original equipment, Ross-tech forum is a good source of information.
4B Adaptation
Code: Select all
4B Adaptation
IDE00001-Production mode,not active ,3
IDE00820-Activating and deactivating all development messages,not active ,1
IDE01996-MAS14455-Installation list: specified installations-Multifunction module on the second bus connection,Yes ,1
IDE01996-SFT00041-Installation list: specified installations-Left light control,Yes ,1
IDE01996-SFT00057-Installation list: specified installations-Right light control,Yes ,1
IDE01996-SFT00075-Installation list: specified installations-Multi-function module,Yes ,1
IDE01996-SFT00214-Installation list: specified installations-Light Control Left 2,Yes ,1
IDE01996-SFT00215-Installation list: specified installations-Light Control Right 2,Yes ,1
IDE02332-Deactivate production mode,0 ,3
IDE03641-Presentation run dynamic AFS light,active ,1
IDE03642-Presentation mode,not active ,1
IDE03679-Adaptive light functions,active ,1
IDE03787-Activate left/right hand drive switch-over,not active ,1
IDE08418-Matrix light: total dimming,100 %,1
IDE09156-Matrix headlamp: function at standstill,not active ,1
IDE13611-Cornering lamp in operation,not active ,1
IDE13612-Matrix head lamps: steering angle,9600.00 °,2
ENG124608-Order_Reference_Run_Activation_Effect,No dependency ,1
ENG124607-Reference_Run_Activation_Effect,Activation effect disabled ,1
ENG103979-Reference_Run_Start_Condition,Engine start ,1
4B Headlight Basic Settings + 4B with A5. ONLINE INFO
Copied from forums (many thanks to their authors
).
The VCDS dialog boxes for the basic setting are not the same but the combination of the info makes it very easy to do so.
Code: Select all
When 4B is coded, clear all errors on 29, 39, D6, and D7.
Clear errors on 4B, headlight basic settings should still be an error.
Perform headlight basic settings:
Basic settings
Basic headlight settings
Activate
Back to Basic settings
Acknowledge basic settings
Activate
There should be no faults on 4B at this point. If you get the “Dynamic cornering light” error….
verify coding
verify adaptions
reset the module
clear faults
perform basic settings again
Soft Reset infotaiment system 5F
Long press the power button until the system reboots and you see the startup screen
Set Factory Light Defaults
Car> Settings> Vehicle > Factory Defaults > Lights
=====================================================
A5 DLA
So, this is the MDF/DLA activation.
You're essentially telling the 3 modules that you are no longer using high beam assistance
(light assist- which turns the high beams on/off above 37mph where permissible),
but instead are using the MDF function which keeps high beams on essentially constantly with adaptability to oncoming traffic.
1. Make 3 Adaptations in Module 09
Select "Fernlicht_Assistent" adaptation menu
Change "Erweiterte Fernlichtsteuerung" to AFS FLA Fernlicht (GLW:MDF).
Change "Menusteuerung Fernlichtassistent" to present.
Change "Menusteuerung Fernlichtassistent Worksteinstellung" to present.
2. Make 2 Long Coding Changes in Module A5
Find byte 19. Change it to hex value 33.
Find byte 21. Change it to hex value 40.
3. Make 3 Long Coding Change in Module 4B (This also adds city lights, highway lights, rain lights, intersection lights)
Go into byte 10. Change it to hex value 7F.
Go into byte 11. Change it to hex value 23.
Go into byte 12. Change it to hex value 63.
4. Soft Reset MIB-II
Long press the power button until the system reboots and you see the startup screen
5. Set Factory Light Defaults
Car> Settings> Vehicle > Factory Defaults > Lights
6. Run Headlight Basic Settings in Module 4B (Make Sure on Level Ground)
Clear fault for "No headlight basic setting" in 4B- Won't initially work, but mandatory.
Go to "basic settings"< "Headlight basic settings" and hold green tick to set them. You'll notice the headlights pivot out.
Go back to "basic settings"< "Acknowledge headlight basic settings" and hold green tick to set them. The headlights will pivot back to normal position.
Clear fault for "No headlight basic setting" in 4B a second time. Your headlights should dance and the fault should clear.
7. Soft Reset MIB-II
Long press the power button until the system reboots and you see the startup screen
8. Set Factory Light Defaults
Car> Settings> Vehicle > Factory Defaults > Lights
Remember to put in the security access code in each module for good measure.
=====================================================
Related
viewtopic.php?p=582892#p582892
4B Long coding
- See Autoscan on this page, I will likely re-code the unit for some predictive functions.
BCM Disable old light settigns
Code: Select all
Leuchte 0 BLK VL B36
ENG116936-ENG115878-Leuchte 0 BLK VL B36-Dimmwert AB 0,127 ,16 ... to 0
ENG116936-ENG115875-Leuchte 0 BLK VL B36-Fehlerort mittleres Byte DTC-DFCC 0,14 ,16 ... to 00
ENG116936-ENG116547-Leuchte 0 BLK VL B36-Lampendefektbit Position 0,34 ,16 ... to 00
ENG116936-ENG115873-Leuchte 0 BLK VL B36-Lasttyp 0,33 - LED-Modul Blinkleuchten ,16 ... to not active
ENG116936-ENG115876-Leuchte 0 BLK VL B36-Lichtfunktion A 0,Blinken links Hellphase ,16 ... to not active
Leuchte1BLK VRB20
ENG116937-ENG115897-Leuchte1BLK VRB20-Dimmwert AB 1,127 ,16 ... to 0
ENG116937-ENG115894-Leuchte1BLK VRB20-Fehlerort mittleres Byte DTC-DFCC 1,15 ,16 ... to 00
ENG116937-ENG116548-Leuchte1BLK VRB20-Lampendefektbitposition 1,3E ,16 ... to 00
ENG116937-ENG115892-Leuchte1BLK VRB20-Lasttyp 1,33 - LED-Modul Blinkleuchten ,16 ... to not active
ENG116937-ENG115895-Leuchte1BLK VRB20-Lichtfunktion A 1,Blinken rechts Hellphase ,16 ... to not active
Leuchte2SL VLB10
ENG116938-ENG115915-Leuchte2SL VLB10-Dimmwert AB 2,100 ,16 ... to 0
ENG116938-ENG115919-Leuchte2SL VLB10-Dimmwert CD 2,28 ,16 ... to 0
ENG116938-ENG115923-Leuchte2SL VLB10-Dimmwert EF 2,28 ,16 ... to 0
ENG116938-ENG115912-Leuchte2SL VLB10-Fehlerort mittleres Byte DTC-DFCC 2,4A ,16 ... to 00
ENG116938-ENG116550-Leuchte2SL VLB10-Lampendefektbitposition 2,48 ,16 ... to 00
ENG116938-ENG115910-Leuchte2SL VLB10-Lasttyp 2,4 - LED Tagfahrlichtmodul Signal ,16 ... to not active
ENG116938-ENG115913-Leuchte2SL VLB10-Lichtfunktion A 2,Daytime running lights ,16 ... to not active
ENG116938-ENG115914-Leuchte2SL VLB10-Lichtfunktion B 2,not active ,16 ... to not active
ENG116938-ENG115917-Leuchte2SL VLB10-Lichtfunktion C 2,Blinken links aktiv (beide Phasen) ,16 ... to not active
ENG116938-ENG115918-Leuchte2SL VLB10-Lichtfunktion D 2,Nebellicht links ,16 ...to not active
ENG116938-ENG115921-Leuchte2SL VLB10-Lichtfunktion E 2,Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht) ,16 ... to not active
ENG116938-ENG115922-Leuchte2SL VLB10-Lichtfunktion F 2,Parklicht links (beidseitiges Parklicht aktiviert li & re) ,16 ... to not active
Leuchte3SL VRB21
ENG116939-ENG115934-Leuchte3SL VRB21-Dimmwert AB 3,100 ,16 ... to 0
ENG116939-ENG115938-Leuchte3SL VRB21-Dimmwert CD 3,28 ,16 ... to 0
ENG116939-ENG115942-Leuchte3SL VRB21-Dimmwert EF 3,28 ,16 ... to 0
ENG116939-ENG115931-Leuchte3SL VRB21-Fehlerort mittleres Byte DTC-DFCC 3,4C ,16 ... to 00
ENG116939-ENG116551-Leuchte3SL VRB21-Lampendefektbitposition 3,4C ,16 ... to 00
ENG116939-ENG115929-Leuchte3SL VRB21-Lasttyp 3,4 - LED Tagfahrlichtmodul Signal ,16 ... to not active
ENG116939-ENG115932-Leuchte3SL VRB21-Lichtfunktion A 3,Daytime running lights ,16 ... to not active
ENG116939-ENG115933-Leuchte3SL VRB21-Lichtfunktion B 3,not active ,16 ... to not active
ENG116939-ENG115936-Leuchte3SL VRB21-Lichtfunktion C 3,Blinken rechts aktiv (beide Phasen) ,16 ... to not active
ENG116939-ENG115937-Leuchte3SL VRB21-Lichtfunktion D 3,Nebellicht rechts ,16 ... to not active
ENG116939-ENG115940-Leuchte3SL VRB21-Lichtfunktion E 3,Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht) ,16 ... to not active
ENG116939-ENG116552-Leuchte3SL VRB21-Lichtfunktion F 3,Parking light right ,16 ... to not active
Leuchte4TFL LB4
ENG116940-ENG115953-Leuchte4TFL LB4-Dimmwert AB 4,127 ,16 ... to 0
ENG116940-ENG115957-Leuchte4TFL LB4-Dimmwert CD 4,127 ,16 ... to 0
ENG116940-ENG115950-Leuchte4TFL LB4-Fehlerort mittleres Byte DTC-DFCC 4,49 ,16 ... to 00
ENG116940-ENG116553-Leuchte4TFL LB4-Lampendefektbitposition 4,3A ,16 ... to 00
ENG116940-ENG115948-Leuchte4TFL LB4-Lasttyp 4,1 - LED Tagfahrlichtmodul Versorgung ,16 ... to not active
ENG116940-ENG115951-Leuchte4TFL LB4-Lichtfunktion A 4,Daytime running lights ,16 ... to not active
ENG116940-ENG115952-Leuchte4TFL LB4-Lichtfunktion B 4,not active ,16 ... to not active
ENG116940-ENG115955-Leuchte4TFL LB4-Lichtfunktion C 4,Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht) ,16 ... to not active
ENG116940-ENG115956-Leuchte4TFL LB4-Lichtfunktion D 4,Parklicht links (beidseitiges Parklicht aktiviert li & re) ,16 ... to not acitve
Leuchte5 TFL RB32
ENG116941-ENG115972-Leuchte5 TFL RB32-Dimmwert AB 5,127 ,16 ... to 0
ENG116941-ENG115976-Leuchte5 TFL RB32-Dimmwert CD 5,127 ,16 ... to 0
ENG116941-ENG115969-Leuchte5 TFL RB32-Fehlerort mittleres Byte DTC-DFCC 5,4B ,16 ... to 00
ENG116941-ENG116554-Leuchte5 TFL RB32-Lampendefektbitposition 5,44 ,16 ... to 00
ENG116941-ENG115967-Leuchte5 TFL RB32-Lasttyp 5,1 - LED Tagfahrlichtmodul Versorgung ,16 ... to not active
ENG116941-ENG115970-Leuchte5 TFL RB32-Lichtfunktion A 5,Daytime running lights ,16 ... to not active
ENG116941-ENG115971-Leuchte5 TFL RB32-Lichtfunktion B 5,not active ,16 ... to not active
ENG116941-ENG115974-Leuchte5 TFL RB32-Lichtfunktion C 5,Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht) ,16 ... to not active
ENG116941-ENG115975-Leuchte5 TFL RB32-Lichtfunktion D 5,Parking light right ,16 ... to not acitve
BCM Enable new light settigns
Code: Select all
Leuchte6ABL LC5
ENG116942-ENG115986-Leuchte6ABL LC5-Lasttyp 6,6 - LED Lichtmodul ,16 ... to LED Abblendlicht
ENG116942-ENG115990-Leuchte6ABL LC5-Lichtfunktion B 6,not active ,16 ... to Lichthupe generell
Leuchte7ABL RB1
ENG116943-ENG116005-Leuchte7ABL RB1-Lasttyp 7,6 - LED Lichtmodul ,16 ... to LED Abblendlicht
ENG116943-ENG116009-Leuchte7ABL RB1-Lichtfunktion B 7,not active ,16 ... to Lichthupe generell
Leuchte8FL LB39
ENG116944-ENG116033-Leuchte8FL LB39-Dimmwert CD 8,0 ,16 ... to 127
ENG116944-ENG116026-Leuchte8FL LB39-Fehlerort mittleres Byte DTC-DFCC 8,1C ,16 ... to 4B
ENG116944-ENG116558-Leuchte8FL LB39-Lampendefektbitposition 8,37 ,16 ... to 44
ENG116944-ENG116024-Leuchte8FL LB39-Lasttyp 8,6 - LED Lichtmodul ,16 ... to LED Abblendlicht
ENG116944-ENG116027-Leuchte8FL LB39-Lichtfunktion A 8,Left high beam ,16 ... to Versorgungsbedarf der LCM Module
ENG116944-ENG116028-Leuchte8FL LB39-Lichtfunktion B 8,Lichthupe generell ,16 ... to not active
ENG116944-ENG116031-Leuchte8FL LB39-Lichtfunktion C 8,not active ,16 ... to Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht)
ENG116944-ENG116032-Leuchte8FL LB39-Lichtfunktion D 8,not active ,16 ... to Parklicht links (beidseitiges Parklicht aktiviert li & re)
Leuchte9FL RB2
ENG116945-ENG116052-Leuchte9FL RB2-Dimmwert CD 9,0 ,16 ... to 127
ENG116945-ENG116045-Leuchte9FL RB2-Fehlerort mittleres Byte DTC-DFCC 9,1D ,16 ... to 49
ENG116945-ENG116559-Leuchte9FL RB2-Lampendefektbitposition 9,41 ,16 ... to 3A
ENG116945-ENG116043-Leuchte9FL RB2-Lasttyp 9,6 - LED Lichtmodul ,16 ... to LED Abblendlicht
ENG116945-ENG116046-Leuchte9FL RB2-Lichtfunktion A 9,Right high beam ,16 ... to Versorgungsbedarf der LCM Module
ENG116945-ENG116047-Leuchte9FL RB2-Lichtfunktion B 9,Lichthupe generell ,16 ... to not active
ENG116945-ENG116050-Leuchte9FL RB2-Lichtfunktion C 9,not active ,16 ... to Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht)
ENG116945-ENG116051-Leuchte9FL RB2-Lichtfunktion D 9,not active ,16 ... to Parklicht rechts
BCM Fernlicht_assistent
Code: Select all
20 + 4B + 8IU LED headlights installed:
ENG141650-ENG141973-Fernlicht_assistent-Erweiterte_Fernlichtsteuerung,Basis: FLA ,6 ... to AFS: FLA: Fernlicht ueber AFS
ENG141650-ENG116639-Fernlicht_assistent-Fernlichtassistent Reset,not active ,6 ... NOT ACTIVE! (to remember HBA active at every ignition cycle)
BCM Level Sender. Leuchtweitenregulierung
Code: Select all
Level Sender - BCM Adaptation
ENG141658-ENG142042-Leuchtweitenregulierung-sensor_headlight_range_control_installed,not installed ,62 ... to rear
ENG141658-ENG142196-Leuchtweitenregulierung-sLWR_verbaut,HIM ,62 ... to not installed
ENG141658-ENG142210-Leuchtweitenregulierung-Ansteuerung_untere_grenze,0.0 %,62 ... to 10%
ENG141658-ENG142211-Leuchtweitenregulierung-Ansteuerung_obere_grenze,100.0 %,62 ... to 90%
ENG141658-ENG154591-Leuchtweitenregulierung-Delay_DC_Motor_Versorgung,-101.5 ms,62 ... to -114.3 ms
ENG141658-ENG142227-Leuchtweitenregulierung-max_v_slwr,255 km/h,62 ... to 0 km/h
ENG141658-ENG142208-Leuchtweitenregulierung-sLWR_Hysterese,1.0 %,62 ... to 20%
ENG141658-ENG142205-Leuchtweitenregulierung-Zyklus_sLWR,1.00 s,62 ... to 0.00 s
ENG141658-ENG142207-Leuchtweitenregulierung-sLWR_SW_Grad,10.0 %/s,62 ... to 0.0 %
BCM Light_Control_Module
Code: Select all
ENG141656-ENG142034-Außenlicht_uebergreifend-Light_Control_Module,not installed ,18 ... to installed
ENG141656-ENG142185-Außenlicht_uebergreifend-LCM_blinker,true ,18 ... to false
GW Adaptations and coding, IC coding
Code: Select all
GW Adaptations
IDE01996-SFT00075-Installation list: specified installations-Multifunction module,Not coded ,32 ... to coded
IDE01996-SFT00075-Installation list: specified installations-Multifunction module,Not coded ,32 ... to coded
GW - Coding
Byte11 Bit1 ... enable
-----------------------
IC - Coding
Byte4 Bit3 ... enable