Page 1 of 1

B&M Short Shift (B&M 45106)

Posted: Mon Jan 31, 2011 12:18 pm
by neilGTI
I have decided to sell my B&M short shift kit, item B&M 45106

This is to fit the Polo GTI.

You will need to get some grease and locktite and also 3 replacement screws as i had to drill the original B&M screws to remove from my car.

You will be able to get all the necessary parts to install from your local screwfix or B&Q for about £5

Image
Photo borrowed from lowfoon

Looking for £75 or £80 posted.

If interested, please email me: admin@midsdubclub.com

Re: B&M Short Shift (B&M 45106)

Posted: Mon Jan 31, 2011 12:34 pm
by alexperkins
my mate wil prob want this - so dibs!

Re: B&M Short Shift (B&M 45106)

Posted: Mon Jan 31, 2011 12:39 pm
by neilGTI
Just let me know as soon as you can please mate by emailing me: admin@midsdubclub.com

i will get the message straight away then to my phone.

Re: B&M Short Shift (B&M 45106)

Posted: Mon Jan 31, 2011 1:34 pm
by alexperkins
Spoken to him and hes not got the moneys :( Good luck with the sale!

Re: B&M Short Shift (B&M 45106)

Posted: Wed Feb 02, 2011 2:38 pm
by neilGTI
No-one interested in this ?

It took me 2 months to get hold of this after ordering it because they are now so rare.

Will let it go for £75 posted

Re: B&M Short Shift (B&M 45106)

Posted: Wed Feb 02, 2011 3:55 pm
by 6N2 GTI 00
This is a bargain! Come on people these are getting rare now

Re: B&M Short Shift (B&M 45106)

Posted: Wed Feb 02, 2011 6:09 pm
by nigelelliott394
I might be interested... It's very, very tempting. It would accompany my gearbox refurbishment quite well.

What's the screws that are needed?

Re: B&M Short Shift (B&M 45106)

Posted: Thu Feb 03, 2011 9:32 am
by neilGTI
If you look carefully at the picture on the blue piece, the three screws go into this piece.

Image

They hold the other pieces onto it, I am 100% positive that screwfix would be able to supply the screws need to complete the kit up again.

Because they old screws were held in with loctite, the heads got rounded off when i tried to take it off, hence why they had to be drilled out.

Re: B&M Short Shift (B&M 45106)

Posted: Fri Feb 04, 2011 11:12 am
by neilGTI
I am off to America in a few days, if this hasn't sold by the time i go away, i will get the screws for it myself to make it back up to a full kit but will end up selling it for £100

Your chance to get it now for £75 posted

Will only cost about a fiver for the screws and loctite.

Re: B&M Short Shift (B&M 45106)

Posted: Wed Sep 26, 2018 2:33 pm
by 6N2GTI
Hi Neil!

I know this is a very, very, VERY old tread, but still interested if you have this thing lying around your house somewhere?
Def. would be interested!

Cheers Marvin