Toad Ai606 + Mark4 Polo

antonio_king · Post by **antonio_king** » Mon Oct 10, 2005 4:33 pm

The whole lot is wired up, except I can't get the damn remote central locking to work...

What coloured wires on the alarm connect to, what coloured wires on the polo?

cheers!

Also, Has anyone set there AI606 to turn on headlights, and close/open windows? If so... What wires go where.. Lol.

Also also... Has anyone got the type 2 microwave sensor, and type2 impact sensors? If so... What wires go where? (they didnt come with instructions)

Cheers Fellas...

Antonio

PS: I'm new here, hi!

macemc86 · Post by **macemc86** » Mon Oct 10, 2005 5:42 pm

havent a clue how to help, but welcome to the forum matey

DScape · Post by **DScape** » Mon Oct 10, 2005 5:44 pm

Hi there, I can't help either

welcome to the forums though!

Maybe you could help me.....how much did one pay for this alarm, because I was looking at getting on the other day!

antonio_king · Post by **antonio_king** » Tue Oct 11, 2005 10:50 am

I paid Â£102 for it... Ebay. came sealed.
Was an extra Â£11.50 for postage.

Funky alarm, I have to say!

DScape · Post by **DScape** » Tue Oct 11, 2005 3:39 pm

antonio_king wrote:I paid Â£102 for it... Ebay. came sealed.
Was an extra Â£11.50 for postage.

Funky alarm, I have to say!

Exactly the same place I've been looking at one

Did you dub come with C/L as standard? Mine don't unfortunately, so I'd need to get that sorted too....along with fitting, because I'd bugger it all up

Glad you like it dude, Im gonna have to get one

mysteryboy · Post by **mysteryboy** » Tue Oct 11, 2005 4:09 pm

I can help!

But.. Don't want to...

Only joking! Welcome

antonio_king · Post by **antonio_king** » Tue Oct 11, 2005 4:45 pm

@DScape... Brought my N reg 1.4 CL For Â£550, My first car, she needed a new windscreen, gearbox, clutch, 4 new tyres, and numerous little things.

I'm 18 years old, I've had my dub since January the 27th of 2005, and I've been legally driving it since April the 1st.

So thats a break down of my cars history.

@Mysteryboy... Go on, spill the beans. Help me protect my polo...

AKs_SlickPolo · Post by **AKs_SlickPolo** » Tue Oct 11, 2005 9:16 pm

I can help you. ive fitted about three alarms in 6n Polos.

First of all where have you located your alarm unit module? is it under the steering or on the passenger side?

The mk4 has pnumatic locking but you need to create an extended +ve pulse in order to make this work... so u need to follow the wires on the alarm that control a positive pulse C/L locking system. You have to do a bit of splicing and soldering of two wires that are coming into the car from the doors. The c/l pump has nothing to do with this connection

antonio_king · Post by **antonio_king** » Wed Oct 12, 2005 8:38 am

the unit is situated on the passenger side.

So I use the Positive Central Locking method... Not Negative?
Someone told me negative... I followed that and f**k all happens.

Which 2 coloured wires do I wire into on the polo passenger door?

antonio_king · Post by **antonio_king** » Thu Oct 13, 2005 8:34 am

WOOP! Fixed it!

AKs_SlickPolo · Post by **AKs_SlickPolo** » Thu Oct 13, 2005 8:54 pm

Cool, i think you must have wired a wire that needed to be soldered to a +12v wire to a earth point hence why nothing happened!

antonio_king · Post by **antonio_king** » Thu Oct 13, 2005 10:40 pm