Drivers side rear seems to be much more tucked into the arch, starting further out at the bottom that it is at the top - kinda angles in as it goes up! Now on the passenger side the gap is greater than that of the drivers between the tyre and the arch but this wheel seems to run straight from bottom to top.
Suspension is all sitting fine, running 10mm spacers on both sides, had wheel bearings tightened up the other week.
(Oh, and yes the problem is still there regardless of where I'm parked. It's not just my driveway. Also when looking at the car straight from behind it seems to be EVER so slightly higher on the passenger side. So, a SMIDGE un-level)
What could be the problem? Could it be the stub axels?