Need some opinions again...

[h4r1s]

Hi,

I can't decide between the completely smooth look and just smoothing the handle out, atm i like the badge with the handle smoothed out, but my original plan was to completely smooth the tailgate. I'm a bit confused atm on what look to go for

here's some photoshops i done, please help me decide, all opinions are welcome!!





Looking forward to see what everyone thinks,

Thanks, Haris

[stani540]

keep the badge and get a rear aero wiper!!!

[Ollie_R]

The smooth tailgate does it for me. Also, you could remove the rear wiper; it tidies up the rear end nicely.

Also, a suggestion; remove the clubpoo sticker and get a nice shiny UK-P one, haha.

[h4r1s]

yup don't worry the wiper is coming off soon, got the rubber gromit sitting in the car just need some time to do it. Also the rear lights look different now, they have been tinted so they match the tints and the badge.

Thanks, for the opinions,

Haris

[sorted]

Take the wiper off on both pics - i think that might help decide.

[h4r1s]

Updated pics

[Bepe]

smooth the f****r

[Redline]

I think if you're going to do it, go the whole hog and smooth all of it.

I'm 50/50 on the black badge on the back anyway, so doing it all looks best to me.

[MaxZ]

Smooth it all, if you decide you don't like it, get the badge stuck on in through the selfadhesive

[New B]

Smooth it all, if you decide you don't like it, get the badge stuck on in through the selfadhesive

X2

Also, a suggestion; remove the clubpoo sticker and get a nice shiny UK-P one, haha.

If you look at the bottom right hand corner of the window it looks like a uk-polos one

Also loving the twist on the rear lights looks alot better in BLACK rather than the usual RED

[LeMeph]

i like the bagde. Wear your dub sign proudly

[h4r1s]

Also, a suggestion; remove the clubpoo sticker and get a nice shiny UK-P one, haha.

If you look at the bottom right hand corner of the window it looks like a uk-polos one

Ollie saw the old pics i had up, which did have a clubpolo sticker on it. Just a quick question about dewipering what do i do with the water line which squirts washer fluid? I don't want to accidently squirt it all into my boot setting the solenoid off, which will open the boot and send all my stuff flying out onto the motorway

[Bepe]

but a bung in it and dont press the leaver, i havent presssed it yet