Forge throttle body hose

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
titan619
Getting There!
Posts: 77
Joined: Thu Oct 04, 2007 1:21 am

Forge throttle body hose

Post by titan619 »

http://www.forgemotorsport.co.uk/conten ... t=FMPOLOTB
Guys
has any one one fitted one of these to their stock intercoolers on their gtis and notice any difference? Am i right in thinking this hose will follow behind the left side front grille?


Thanks
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Forge throttle body hose

Post by KennyPOLO_Gti »

IMO it will make no difference at all apart from looks. Ave ordered one with my FMIC just so it matches my T.I.P and thats it. The OEM hose will soften up more but wont loose shape and collapse on you :wink:
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Forge throttle body hose

Post by KennyPOLO_Gti »

P.S yes it will connect from your MAF to inlet manifold on the left hand side :)
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Re: Forge throttle body hose

Post by whitegtipolo »

cant see any performance increase as the other hoses will expand still!
titan619
Getting There!
Posts: 77
Joined: Thu Oct 04, 2007 1:21 am

Re: Forge throttle body hose

Post by titan619 »

thanks for the replies i didt think their would be any gain either..
Forge Motorsport
New
Posts: 12
Joined: Fri Jul 25, 2008 12:02 pm
Location: Gloucester, UK

Re: Forge throttle body hose

Post by Forge Motorsport »

Its not so much a gain, more a prevention, as the stock hose gets very soft after a run where the silicon will hold its shape better. Looks good too. Softening doesn't seem to affect the hoses lower in the engine bay, i guess it affects this one so much as its behind the rad.
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Forge throttle body hose

Post by KennyPOLO_Gti »

hey Forge, any idea if I will get my FMIC this week??? Dont know my order number sorry. :?
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Re: Forge throttle body hose

Post by whitegtipolo »

Forge Motorsport wrote:Its not so much a gain, more a prevention, as the stock hose gets very soft after a run where the silicon will hold its shape better. Looks good too. Softening doesn't seem to affect the hoses lower in the engine bay, i guess it affects this one so much as its behind the rad.
looking at the hose from the turbo where it joins onto the forge bit behined the wheel arch can this be replaced as its not available??
Forge Motorsport
New
Posts: 12
Joined: Fri Jul 25, 2008 12:02 pm
Location: Gloucester, UK

Re: Forge throttle body hose

Post by Forge Motorsport »

Kenny, yes you'll get your FMIC this week. We just finished a batch of five.
As for the turbo outlet hose, its possible if theres enought interest, but for what reason do you want to replace it ?
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Re: Forge throttle body hose

Post by whitegtipolo »

Forge Motorsport wrote:Kenny, yes you'll get your FMIC this week. We just finished a batch of five.
As for the turbo outlet hose, its possible if theres enought interest, but for what reason do you want to replace it ?
because its a shame to uprate all the hoses bar that one? Any1 else interested in a turbo outlet pipe?
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Forge throttle body hose

Post by KennyPOLO_Gti »

Think it would make any difference?? Not as if anyone can see it apart from the road!
Post Reply