1.4 MPI REMAP
1.4 MPI REMAP
Just bought another polo which is a 1.4 mpi and ive seen that it is very slow compared to my 1.4 TDI so i was wondering if anyone has got theirs remapped? Tried looking at loads of places and they dont seem to do the mpi, only the 16v.
Anyone recommend a place?
Thanks
Anyone recommend a place?
Thanks
Re: 1.4 MPI REMAP
you could get it remapped but there wouldn't be any point you might get 2-6bhp extra out of it but thats it and for like 200-300 quid not worth it really is it
Re: 1.4 MPI REMAP
I got 7bhp extra on my 16v with a induction kit, raceland manifold, sport cat and powerflow exhaust ... so if yours is standard i am guessin you would get about 3hp or 4 if your lucky. Waste of money not worth it.
Re: 1.4 MPI REMAP
damn it! might as well just get a full stainless steel exhaust system with BMC air filter
Re: 1.4 MPI REMAP
I got 76bhp out of my 1.4 standard 6n with BMC Airfilter and cold air feed. Got the graph to prove it too.
Re: 1.4 MPI REMAP
damn! Just with the bmc?
Re: 1.4 MPI REMAP
Got nothing else other than the BMC and a cold air feed going under the bumper and through the 6n 16v front bumper grill. Its a 1.4 8v 6n with 60bhp as standard.
Re: 1.4 MPI REMAP
Well i got a reply today from angel tuning and they said they can get me extra 8bhp. so that would make mine 68bhp plus stainless steel manifold should give extra 10 - 20 % lets say thats 72bhp plus a BMC air filter should boost to like at least 75
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: 1.4 MPI REMAP
I think that's a bit ambitious, but would like to be proved wrong!
Re: 1.4 MPI REMAP
i'd be interested to see how it turns out.
you going to go through with it then??
you going to go through with it then??
Re: 1.4 MPI REMAP
yeah as soon as i sell my other polo, im gonna get the remap and bmc straight away, and then next month get the stainless steel manifold. One question though, do i just need the manifold pipe to be stainless steel, or the whole exhaust system?
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: 1.4 MPI REMAP
I'd get stainless throughout. I'd also leave the remap til you've got the exhaust done. Would make more sense.
Re: 1.4 MPI REMAP
yeh as tim said, get your work done first then your re-map afterwards.
-
- New
- Posts: 31
- Joined: Fri Nov 17, 2006 1:09 am
- Location: Canterbury/ London Drives: 6n2 1.4 8v
Re: 1.4 MPI REMAP
Looking forward to seeing how this turns out. Keep us updated
Re: 1.4 MPI REMAP
ive decided to sell the 1.4 mpi petrol...