Anyone camber shimed ther comps?
Anyone camber shimed ther comps?
As above looking to pick up some cambershims, can anyone shead anylight on them, have any opinions, or have any pics
Anyone camber shimed ther comps?
Nobody lol
-
- Silver Member
- Posts: 374
- Joined: Mon Jan 10, 2011 11:03 pm
- Location: Portsmouth, Hampshire.
Re: Anyone camber shimed ther comps?
I guess not :/
Im interested in these aswel... They are only like £18 from venom motor sports, might be worth a go...?
Im interested in these aswel... They are only like £18 from venom motor sports, might be worth a go...?
- lukey GTI
- Silver Member
- Posts: 371
- Joined: Mon May 16, 2011 10:38 am
- Location: huddersfield
- Contact:
Re: Anyone camber shimed ther comps?
how will it effect handling ?
-
- Silver Member
- Posts: 374
- Joined: Mon Jan 10, 2011 11:03 pm
- Location: Portsmouth, Hampshire.
Re: Anyone camber shimed ther comps?
Well ive got camber adjustments on my front coilovers and ive adjusted them from -0.5 negative camber (Standard) to -2 negative camber you can just about see the difference but i did feel it alot more stable in the corners! I would defiantly recommend camber to anyone who can get it.lukey GTI wrote:how will it effect handling ?
Anyone camber shimed ther comps?
I got a pic man?Mr Blobby wrote:Well ive got camber adjustments on my front coilovers and ive adjusted them from -0.5 negative camber (Standard) to -2 negative camber you can just about see the difference but i did feel it alot more stable in the corners! I would defiantly recommend camber to anyone who can get it.lukey GTI wrote:how will it effect handling ?
Anyone camber shimed ther comps?
Also how does it effect ur tyre wear? Drastic?
-
- Silver Member
- Posts: 374
- Joined: Mon Jan 10, 2011 11:03 pm
- Location: Portsmouth, Hampshire.
Re: Anyone camber shimed ther comps?
I'll get one up Monday if I remember tyres are fine, I got new tyres begining of September and I had the wheels off today and the tread is perfectly even very happy with camber.drennan wrote:Also how does it effect ur tyre wear? Drastic?
Still don't know how the shims work though... Anyone know that?
Re: Anyone camber shimed ther comps?
they fit between the drum or disc and the rear beam, they just push put the bottom of the drum or disc and the stub axel hence 'leaning' the wheel into the centre of the car.
i ran around 3.5 deg with a 1.5 deg shim and two extra washers on the bottom two screws
HTH
i ran around 3.5 deg with a 1.5 deg shim and two extra washers on the bottom two screws
HTH
Anyone camber shimed ther comps?
U got a pic matey?AdamR8 wrote:they fit between the drum or disc and the rear beam, they just push put the bottom of the drum or disc and the stub axel hence 'leaning' the wheel into the centre of the car.
i ran around 3.5 deg with a 1.5 deg shim and two extra washers on the bottom two screws
HTH
-
- Silver Member
- Posts: 374
- Joined: Mon Jan 10, 2011 11:03 pm
- Location: Portsmouth, Hampshire.
Re: Anyone camber shimed ther comps?
Sorry I forgot to upload some pics. They aren't amazing because I have no poke on the wheels :/ But I hope you get the idea The camber is set at 2.5 degrees negative i think