Josh 6r Polo GTI Pearl Black

JCT 1991 · Post by **JCT 1991** » Sun Feb 17, 2013 7:21 pm

Got a few pictures done on the weekend with one of my mates i think they came out very well.

JCT 1991 · Post by **JCT 1991** » Thu Feb 21, 2013 6:18 pm

Had the Oil breather put on by volkswagen this afternoon after a few consumption issues i have to bring it back in after 1000 miles or until the oil light pop's up !
and then they will see if it is necessary to take it to the next step !

Wolfi · Post by **Wolfi** » Fri Feb 22, 2013 8:01 pm

The GTI is looking fantastic in them pictures you took at the top of the page.

Well done mate!

JCT 1991 · Post by **JCT 1991** » Mon Feb 25, 2013 7:03 pm

well I'm made up with it absolutely fantastic car ! next in line is a new intercooler and some form of lowering ! looking at the new APR intercooler with the 113% increase on stock. lowering wise im not too sure i don't want the car slammed i just want to drop the gap on the arch's so im looking at some lowering springs but i just cant make up my mind !

JCT 1991 · Post by **JCT 1991** » Sat Mar 09, 2013 9:01 am

The polo is in on Wednesday for final diagnosis then I should be getting a new engine ! The breather mod has helped but the oil usage still seems to be out of spec !

JCT 1991 · Post by **JCT 1991** » Wed Mar 20, 2013 6:57 pm

Going For its new engine tomorrow ! Finally.

franko247g · Post by **franko247g** » Wed Mar 20, 2013 10:12 pm

Car really does look nice, have they given you a time frame for sorting it?

JCT 1991 · Post by **JCT 1991** » Fri Mar 29, 2013 11:10 am

The work took two days to do which was reasonable it was just the faffing about with getting invoices and job cards which took ages almost a week after getting it back I on,y just got the paperwork!

The car is running a lot better since the job has been done , I've been allowing the engine oil temp to get to 85degrees before I will even consider putting in any high revs and giving it a good variety at the rev range once its there ! Checked my oil level last night after 250 miles and no change what so ever , before the engine replacement was carried out it would be on at lease 60% on the dip stick.

franko247g · Post by **franko247g** » Fri Mar 29, 2013 1:53 pm

Wow so massive improvement there then! Hopefully it will stay issue free

JCT 1991 · Post by **JCT 1991** » Mon Apr 01, 2013 9:20 pm

Milltek ready to got back on tomorrow after the whole engine replacement episode.

cleaned all the joints today

cant wait to get it back on tomorrow but i wont be getting the Stage 2 map back on until next week !

rover220 · Post by **rover220** » Mon Apr 01, 2013 9:24 pm

very nice. looks like you are making some excellent mods there

mashmarriner · Post by **mashmarriner** » Tue Apr 02, 2013 10:21 am

is that the sports CAT u have mate

JCT 1991 · Post by **JCT 1991** » Tue Apr 02, 2013 6:30 pm

its a high flow sports CAT according to Milltek, which is produced by HJS

http://www.awesomegti.com/car/vw/polo6r ... wagen-polo

JCT 1991 · Post by **JCT 1991** » Wed Apr 03, 2013 10:22 pm

Standard vs Milltek in park rev's limited to 4k

Standard
http://s1048.photobucket.com/user/JoshT ... 0.mp4.html

Milltek(turboback)
http://s1048.photobucket.com/user/JoshT ... 6.mp4.html

mashmarriner · Post by **mashmarriner** » Thu Apr 04, 2013 3:36 pm

sounds lush man, is it really loud when inside car, as i have a baby on way and getting a GTI soon, but still wanting to get some VROOM VROOM out of it, is it ok to just drive around town in with the sports cat like not too loud, i defo no a DEcat is way to loud

UK-POLOS.NET - THE VW Polo Forum