as you may know, my hobby is making my car look like a 6C. And instead of selling the 6R and buying a 6C, there is the beautifully complicated and satisfying world of modding.
Now, I'm retrofitting the 6C Climatronic panel to the car and it works mostly. Only it doesn't get warm so fast.
So I think, maybe the auxillary heating is not wired correctly. Check all wires, right?
So the wire from ECU T96/19 to J162 T16c on J162 caught my eye. I cannot find J162 in my car.
So let's ask ElsaWIN for J162.
It finds it here:
Indeed the F268 is also present, the auxillary heating switch.
Perhaps J162 is the climatronic control unit? It does have the T16 connector (interface with the car) and a T20 connector (interface with the motors and sensors).
But no. The T16 connector on the climatronic control unit is already connected to the sunlight sensor.
Anyone knows where The wire from the ECU to J162 has to be?
It is rather strange that VW describes the wire for Climatronic only (see asterisk on first image) but T16c appears to be a manual airco connector.
The T16 connector of the climatronic has a different name too.
Disclaimer: My car has the 7E0 BCM from the T6 Transporter, I cannot guarantee it works on the Polo 6R with other BCM.
