Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
LawrenceDGraham wrote: ↑Wed Jan 30, 2019 10:23 pm
You still got the exhaust is it a full stainless exhaust turbo back or cat back?
The rims still about as well?
It's a 1.2 so can't be turbo back lol, but it's from flexis back I believe, would have to come off as full mani back as I'm sure its welded. Rims still around for collection, £200.
Hello. I’ve seen you had a gti roof spoiler. How is it attached to the standard factory spoiler that comes on the majority of 6C non-GTI Polos? I am planning to add it to mine and would like to find out how it can be installed...Thanks
Attached is my poorly drawn diagram of how I attached the spoiler. The plastic bits that stick out on the gti spoiler were cut off and then sanded down to smooth. The red indicates a sealant (can’t recommend tiger seal enough) and the yellow is the 3M tape. I had a friend come over and applied the 3M tape to the spoiler beforehand, and then applied the sealant and held it in place for about five minutes, and then taped it up with masking tape to hold it in place while it dried fully. You just need to make sure it has a good seal all around to prevent water ingress etc. Make sure to wipe off any excess sealant pretty quick as once it’s dry it’s much harder to get off.