Polo 6R/6C Photo Gallery
- iichel
- Bling Bling Diamond Member
- Posts: 6384
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Polo 6R/6C Photo Gallery
Likely 288 or 312mm with Audi S1 caps
- Lee_Liu_Te
- New
- Posts: 25
- Joined: Sat May 16, 2020 9:48 pm
- Drives: 6R 1.2 TDI Bluemotion
- Location: Poland
Re: Polo 6R/6C Photo Gallery
Na 99% są to zaciski z audi s1 8X0615123A, 8X0615124A. Plus tej blaszki jest taki że jest przykręcana i można ją odkręcić i pomalować jak się chce
- Attachments
-
- 1637922673902.jpg (14.92 KiB) Viewed 30750 times
-
- 1635176163548.jpg (19.63 KiB) Viewed 30750 times
-
- Getting There!
- Posts: 56
- Joined: Sat Feb 24, 2018 8:58 am
- Drives: 2017 VW Polo Blue GT 1,4 TSI DSG7
- Location: Copenhagen, Denmark
- Contact:
Re: Polo 6R/6C Photo Gallery
Close
Audi S1 brakes and Zimmermann 310 mm sportdiscs
- Attachments
-
- 83291C7C-E08D-44D0-91BB-BC7C4789DA13.jpeg (3.88 MiB) Viewed 30597 times
-
- 6723D20E-96AB-4064-B7F8-9CACF291455D.jpeg (3.18 MiB) Viewed 30597 times
Re: Polo 6R/6C Photo Gallery
good works
Re: Polo 6R/6C Photo Gallery
very nicefunlovincriminal wrote: ↑Fri May 07, 2021 10:28 am My GTI with 18'' BOLA VST
PXL_20210416_133447490_2.jpg
PXL_20210416_133457352_2 (1).jpg
-
- New
- Posts: 3
- Joined: Tue Feb 22, 2022 10:21 pm
- Drives: polo gti 6c 2017 (67)
- Location: wolverhampton
Re: Polo 6R/6C Photo Gallery
wheels done gloss black..
- Attachments
-
- 2A984479-9A11-4C33-AABD-13FA59DE9D28.png (1.48 MiB) Viewed 30869 times
Re: Polo 6R/6C Photo Gallery
- iichel
- Bling Bling Diamond Member
- Posts: 6384
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Polo 6R/6C Photo Gallery
It's a bolt-on upgrade (only change the carriers) if you have the 288mm setup.
-
- Platinum Member
- Posts: 1118
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R/6C Photo Gallery
The time has arrived
I'm going to use light wheel set setup to get the maximum possible. Will run hankook k125 in 195/55 stock. We will see how they grip maybe 205/50 upgrade Toyo TR1.
I dont see the turbo running anywhere near 2.3 bar ( no need for map upgrade (stock is i think 2.5 bar/3 bar) )
Tommorow it should go in, I will have access to 2post lift. Fingers crossed everything goes well.
My goal is 180hp and a sleeper. I have no outside modifications (will probably remove the rear tint).
Next:
288 mm brake upg.+ 2kg of rotational mass
Custom dog bone mount ( I have everything drawn out) -Stiffer, weight 750g.
Short shifter modification nothing crazy.
I'm going to use light wheel set setup to get the maximum possible. Will run hankook k125 in 195/55 stock. We will see how they grip maybe 205/50 upgrade Toyo TR1.
I dont see the turbo running anywhere near 2.3 bar ( no need for map upgrade (stock is i think 2.5 bar/3 bar) )
Tommorow it should go in, I will have access to 2post lift. Fingers crossed everything goes well.
My goal is 180hp and a sleeper. I have no outside modifications (will probably remove the rear tint).
Next:
288 mm brake upg.+ 2kg of rotational mass
Custom dog bone mount ( I have everything drawn out) -Stiffer, weight 750g.
Short shifter modification nothing crazy.
Re: Polo 6R/6C Photo Gallery
Here's my Blue GT, I've completed the 6R GTI front end swap including a TRC front splitter. For the lower grill sections, I painted them with black PlastiDip to get rid of the horrible grey finish for a more blended appearance with the bumper! Next up, I've got some Porsche wheels waiting to go on...
Instagram: @polo_blackgt
Instagram: @polo_blackgt
-
- Getting There!
- Posts: 61
- Joined: Thu Jun 30, 2016 7:29 pm
- Drives: polo 1.8 tsi gti bluetec
- Location: ashford kent
Re: Polo 6R/6C Photo Gallery
I purchaced a set of aftermarket alloys that look exactly the same as the original wheels the polo came with, i curved the original alloys so needed to refurb them, the only issue was that the hub logo’s were smaller than the original one on the original alloys, i looked online for some hub logo’s & i saw the golf gti hub logo’s which looked smart but they were being sold from dealers for £75 a set so i wernt paying that so i purchaced a set of caddy hub logo’s secondhand in great condition which have the same details as the smaller ones that came with my polo, purchased some red heat resistant spaypaint & some lacquer & made some golf gti center caps, for a fraction of the price , i use the backs of the caps that came with the aftermarket alloys because the caddy ones wouldnt clip in the alloy as the clip bits were shorter so i spliced & grafted them to fit & hold tight in the alloys, then painted & varnished them , they came up a treat & looked well polished against the new alloys , to this day they are still looking good , the pic of my car was before i done the caps , but thats my polo 2016 gti 1.8 192hp tsi bm all waxed & machine polished .
- Le_Combattant
- Silver Member
- Posts: 313
- Joined: Sun Mar 07, 2021 4:04 pm
- Drives: Polo 6C 1.2 TSI 90 Cup
- Location: France
- iichel
- Bling Bling Diamond Member
- Posts: 6384
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Polo 6R/6C Photo Gallery
Darkside TDI turbo damper delete?