6R Cruise Control Retrofit Problems

Chat about your 6R/6C model Polos here!
Kratosmr
New
Posts: 12
Joined: Mon Sep 12, 2022 7:54 am
Drives: Polo 1.2 TDI CFWA
Location: India - Tamilnadu

Re: 6R Cruise Control Retrofit Problems

Post by Kratosmr »

Hi, It was manual from factory. After upgrading the BCM I added the Remote Key (Center Locking works perfectly with Remote Key, Boot Lock also).
patil
Silver Member
Posts: 492
Joined: Wed Dec 07, 2016 8:34 pm
Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
Location: Foothills of Nilgiris, India

Re: 6R Cruise Control Retrofit Problems

Post by patil »

Check the adaptation addresses 03 &04 in BCM and see what is the stored value.

6R0 937 087 F is this the BCM you've upgraded to according to your scan ? If yes then this BCM won't support Cruise control as it doesn't have necessary pins.

Edit: Check for presence of 4 pins t73b 44 -47 in the BCM you've upgraded.
Kratosmr
New
Posts: 12
Joined: Mon Sep 12, 2022 7:54 am
Drives: Polo 1.2 TDI CFWA
Location: India - Tamilnadu

Re: 6R Cruise Control Retrofit Problems

Post by Kratosmr »

Hi, That 4 Pins are there. I checked it while buying and only 6RU937087F don't support CC, but 6R0937087F has those pins. I have completed the wiring now. The CC buttons are working I checked using VCDS, And also I have changed the ECU byte 5 bit 5 and it accepted the coding. I will reassemble everything now and will report.

BCM picture: https://drive.google.com/file/d/1AhdB2a ... share_link
Kratosmr
New
Posts: 12
Joined: Mon Sep 12, 2022 7:54 am
Drives: Polo 1.2 TDI CFWA
Location: India - Tamilnadu

Re: 6R Cruise Control Retrofit Problems

Post by Kratosmr »

Hi, CC is working perfectly. Thanks a lot Iichel and Patil for your kindly replies. Thanks a lot for this forum for all the valuable information from masters.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6358
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: 6R Cruise Control Retrofit Problems

Post by iichel »

Well done, good job
User avatar
ag69
Silver Member
Posts: 429
Joined: Fri May 26, 2017 10:39 am
Drives: 1.2TSi 77Kw 7DSG
Location: Earth

Re: 6R Cruise Control Retrofit Problems

Post by ag69 »

Good to read that CC is working.
patil
Silver Member
Posts: 492
Joined: Wed Dec 07, 2016 8:34 pm
Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
Location: Foothills of Nilgiris, India

Re: 6R Cruise Control Retrofit Problems

Post by patil »

Excellent job... 😎👍

Share the pictures and video of your work done.
Kratosmr
New
Posts: 12
Joined: Mon Sep 12, 2022 7:54 am
Drives: Polo 1.2 TDI CFWA
Location: India - Tamilnadu

Re: 6R Cruise Control Retrofit Problems

Post by Kratosmr »

Hi, any suggestion on getting the ECU wire through firewall?
Till now I did the tests by running the cable over the door.

Current Wire Run: https://drive.google.com/file/d/1NZvt5v ... share_link

I tried accessing the rubber grommet below the water cowl. But the other side of the hole is full of fabric insulations and pu sheets, whether removing the glove box is the only way?

Edit: Made a hole in insulation which made the cable management possible.
:D :D
Antera
New
Posts: 1
Joined: Sun Feb 05, 2023 1:33 pm
Drives: Polo 6C
Location: Nederland

Re: 6R Cruise Control Retrofit Problems

Post by Antera »

Hallo

I have a issue with the cruise control on a Up 1.0 TSI. CHYA engine code . I tryed al lot but never find the solution.


I hope someone van give me the solution.

We did the whole wiring and checked and checked. When looking in VCDS we have all the signals when looking in mesauring blocks. 09 we see all and also in 17 for the MFD. This also works. But when looking in de engine the cruise signal it stays on 66. No change when using the handle.

We see alle buttons but we are missing something because we cant get it to work. No light in dash also.

We tryed both engine bcm connectors on pin 29. But without Any result. I tink we have the wrong pin but cant figure put wich we need.

Is there somebody who van tell me wich pin i need on engine module or some other help.

Wiring als follows ( model before 11-2013)

Stalk Pin 31 -> BCM Connector B(white) pin 46 (diode)
Stalk Pin 30 -> BCM connector B(white) pin 44
Stalk Pin 28 -> Fuse 12V SC5(contact +15)
Stalk Pin 27 -> BCM Connector B(white) pin 47
Stalk Pin 29 -> A130 SRS-kabellas
Stalk Pin 26 -> A130 SRS-kabellas
A130 SRS-kabellas -> Engine ECU T56A Pin 29
A130 SRS-kabellas -> BCM Connector B(white) pin 45
Stalk pin 31 -> BCM connector B(White) pin 46
wewuzKANGS
New
Posts: 1
Joined: Sun Feb 12, 2023 12:35 am
Drives: mk5
Location: Mexico

Re: 6R Cruise Control Retrofit Problems

Post by wewuzKANGS »

ciclo wrote: Sun Feb 15, 2015 8:58 pm Cruise control system 1.2 TSI

T94/45


Image

VCDS

Engine Byte5

Image

BCM Byte17

Image
hi!
can you please share screen shots off all the long coding info of your ecu?
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7776
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: 6R Cruise Control Retrofit Problems

Post by ciclo »

Antera wrote: Sun Feb 05, 2023 1:49 pm Hallo

I have a issue with the cruise control on a Up 1.0 TSI. CHYA engine code . I tryed al lot but never find the solution.


I hope someone van give me the solution.

We did the whole wiring and checked and checked. When looking in VCDS we have all the signals when looking in mesauring blocks. 09 we see all and also in 17 for the MFD. This also works. But when looking in de engine the cruise signal it stays on 66. No change when using the handle.

We see alle buttons but we are missing something because we cant get it to work. No light in dash also.

We tryed both engine bcm connectors on pin 29. But without Any result. I tink we have the wrong pin but cant figure put wich we need.

Is there somebody who van tell me wich pin i need on engine module or some other help.

Wiring als follows ( model before 11-2013)

Stalk Pin 31 -> BCM Connector B(white) pin 46 (diode)
Stalk Pin 30 -> BCM connector B(white) pin 44
Stalk Pin 28 -> Fuse 12V SC5(contact +15)
Stalk Pin 27 -> BCM Connector B(white) pin 47
Stalk Pin 29 -> A130 SRS-kabellas
Stalk Pin 26 -> A130 SRS-kabellas
A130 SRS-kabellas -> Engine ECU T56A Pin 29
A130 SRS-kabellas -> BCM Connector B(white) pin 45
Stalk pin 31 -> BCM connector B(White) pin 46
Image
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7776
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: 6R Cruise Control Retrofit Problems

Post by ciclo »

wewuzKANGS wrote: Tue Feb 14, 2023 10:46 pm
ciclo wrote: Sun Feb 15, 2015 8:58 pm Cruise control system 1.2 TSI

T94/45




...
hi!
can you please share screen shots off all the long coding info of your ecu?
Hi, Engine?, BCM? ...

What specifically do you want to know? What is your goal? ...
Danish
New
Posts: 1
Joined: Fri Oct 20, 2023 6:17 am
Drives: Polo 2012
Location: Ind

Re: 6R Cruise Control Retrofit Problems

Post by Danish »

Kratosmr wrote: Sat Feb 04, 2023 2:44 pm Hi, CC is working perfectly. Thanks a lot Iichel and Patil for your kindly replies. Thanks a lot for this forum for all the valuable information from masters.
Can you share picture of your car
Kratosmr
New
Posts: 12
Joined: Mon Sep 12, 2022 7:54 am
Drives: Polo 1.2 TDI CFWA
Location: India - Tamilnadu

Re: 6R Cruise Control Retrofit Problems

Post by Kratosmr »

Hi Danish, you mean the exterior pics?
Buci
New
Posts: 11
Joined: Fri Nov 03, 2023 5:06 pm
Drives: 6R 2011
Location: Croatia

Re: 6R Cruise Control Retrofit Problems

Post by Buci »

Hello,

I am new in retrofitting on my polo 6R 2011, left hand drive but if can somebody help me with schematic and pins for retrofitting trip computer and crusie control that would be great.
Engine is 1.2 50 kw (70hp). Tenth letter is 'C'. So ciclo if you can help or anybody please do.

I bought the used levers and bcm 937087 and I will change the BCM soon.
Now just to buy vcds and get started.
I will make my own harness but could somebody recomend some links where to buy it from with speedy delivery?

Buci
Last edited by Buci on Sat Jan 06, 2024 1:14 pm, edited 1 time in total.
Post Reply