Hi to all. Found this loose wire within the rubber boot on the drivers side a pillar. It appears to go to the middle multi plug but have no idea where this should go to as all pin connections are taken for ?
Kind regards
Drivers door central locking issue
-
Duc748
- New
- Posts: 2
- Joined: Sat Sep 02, 2023 12:17 pm
- Drives: 2004 Polo 9n 1.2 12v
- Location: West Midlands
Drivers door central locking issue
- Attachments
-
- 20230902_121313.jpg (2.9 MiB) Viewed 1257 times
-
Maarten
- Silver Member
- Posts: 393
- Joined: Tue Aug 11, 2015 9:45 am
- Drives: AW R-line Facelift MY2022 Vibrant Violet
- Location: The Netherlands
Re: Drivers door central locking issue
Are you 100% sure that this wire does not belong in the connector?
Does everything work on that side on the door? Window, speaker lock, doorlight etc?
Does everything work on that side on the door? Window, speaker lock, doorlight etc?
-
ciclo
- Bling Bling Diamond Member
- Posts: 7809
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Drivers door central locking issue
It looks like it's orange/brown, right? In that case it would be the CAN bus low.
It doesn't matter if the vehicle is RHD or LHD, It is always contact terminal 16 of the 21-pin connector.
It doesn't matter if the vehicle is RHD or LHD, It is always contact terminal 16 of the 21-pin connector.