Audi A1 GB (82A) Chronos Gray by Favi :)

A section of the forum for members to show off their non-polo vehicles.
Post Reply
favi
Bronze Member
Posts: 115
Joined: Sun Feb 28, 2016 6:35 pm
Drives: 6R
Location: Poland

Audi A1 GB (82A) Chronos Gray by Favi :)

Post by favi »

Hello !
Im Pawel from Poland. After 12.5 years, it's time to change the VW Polo 6R (viewtopic.php?t=71015&sid=7e6bd68ccf138 ... 47402e30bc) to the Audi A1 ;)

Audi A1 GB (82A) - 1.0 TFSI S-tronic S-line
Engine:DKRF
Gearbox:TSV
Colors - LX7G Chronos Gray Metallic + Black
Photos from myAudi app ;)

Image ImageImage ImageImage Image

Mods? Retrofits? YES!
Audi like VW Polo will also has modifications :)
1. washer fluid level sensor
2. headlight washers
3. Steering wheel - 82A 419 091 AH LCW or from Audi Q3 83A419091AP
4. Side assist (blind spot)
5. Roof liner - 82G867505F L12
6. Coding HBA
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7809
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Audi A1 GB (82A) Chronos Gray by Favi :)

Post by ciclo »

Hi Pawel, welcome to this section of the forum.💪🤗

Congratulations on your new acquisition!! the current A1 is very beautiful, we hope you will enlighten us with many/some images of your new and beautiful car.

Remember to do a first Autoscan and a complete readout of all adaptation channels from all control units without mods.🧙‍♂️
(whole vehicle, CSV file & Raw Hex :arrow: viewtopic.php?p=572894#p572894)

Our Golf has the same DKRF engine, and for now I can only tell you that we are very happy with its performance, it is very pleasant to drive, it surprises and puts a smile on your face if power is required, it claims 115 HP but I think it is a little more, which is more than enough for daily use with a little fun. :)
favi
Bronze Member
Posts: 115
Joined: Sun Feb 28, 2016 6:35 pm
Drives: 6R
Location: Poland

Re: Audi A1 GB (82A) Chronos Gray by Favi :)

Post by favi »

First mods
1. washer fluid level sensor
7M0919376+7M0919382+1J0973202
2 pins:
- 1 ground
- 1 BCM (I'm not sure, but it will probably be T46b/28)


2. headlight washers
6R0955681
2 pins :
- 1 ground
- 1 BCM (I'm not sure, but it will probably be T46b/46)
Last edited by favi on Sun Mar 03, 2024 1:40 am, edited 1 time in total.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6368
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Audi A1 GB (82A) Chronos Gray by Favi :)

Post by iichel »

Yep those pins are indeed correct for any MQB car. Will you also do the heated washer nozzles?
giannis20vt
Silver Member
Posts: 260
Joined: Sat May 15, 2021 6:23 am
Drives: Polo 6c MY2016 1.0 75Hp
Location: Greece

Re: Audi A1 GB (82A) Chronos Gray by Favi :)

Post by giannis20vt »

Hello,
The A1 is an excellent car. I'm glad for you.
I hope you enjoy it and of course I already read that you have designed the first retrofits. Good luck with these and have fun.
favi
Bronze Member
Posts: 115
Joined: Sun Feb 28, 2016 6:35 pm
Drives: 6R
Location: Poland

Re: Audi A1 GB (82A) Chronos Gray by Favi :)

Post by favi »

iichel wrote: Wed Feb 28, 2024 2:50 pm Yep those pins are indeed correct for any MQB car. Will you also do the heated washer nozzles?
I forgot about it :D
I found :
82A955987A
82A955988A
and 2x 8e0973202


correct?

wiring scheme?

Edit :D
I Found from T-roc scheme:
T2cb/1 and T2cc/1 -> T46b/9

Correct?

EDIT
I have factory installed heated washer nozzles :D
Post Reply