EA211 Oil Catch can

[ciclo]

Little by little (step by step), you will surely find the right hoses for that place.

[Le_Combattant]

Little by little (step by step), you will surely find the right hoses for that place.

I have to make an order from...a UK/swedish sellers because in France, nothing available. Very small choice.

But I would like to go fast, when I removed the charge pipe, it was already covered by a thin lawer of oil.

[2226]

You will need flourosilicone hose. Those should be resistant to oil and fuel. I think they're usually identified by a black liner on the inside.

[2226]

Try Viper Performance in the UK for flouro hose.

[Le_Combattant]

Thanks for sharing !

[2226]

I might go with just a diesel transfer hose type if it's not too rigid.
All the silicone hose I see around from the performance shops here is just air hose. They state chemical resistance, but I doubt that.
I am looking to replace the airbox to turbo intake hose with a silicone hose which might get fed some post-turbo air which might contain oil. Hopefully a catch puts less into that.

[Le_Combattant]

I might go with just a diesel transfer hose type if it's not too rigid.
All the silicone hose I see around from the performance shops here is just air hose. They state chemical resistance, but I doubt that.
I am looking to replace the airbox to turbo intake hose with a silicone hose which might get fed some post-turbo air which might contain oil. Hopefully a catch puts less into that.

I made an order for flourosilicone hose. We will see, for 150 euros, I hope it will work.

[2226]

I made an order for flourosilicone hose. We will see, for 150 euros, I hope it will work.

Damn... some pricey stuff.

[Le_Combattant]

Yes...so It have to work now

[2226]

Off-topic...
Just looking over pics again.
What is the purpose of this sensor:

PXL_20240316_174416742.jpg (2.69 MiB) Viewed 434 times

It is brake vacuum or booster pressure sensor. Just curious as to what it connects to and what it is used to control.

[Le_Combattant]

You are right, It is brake vacuum line

[2226]

lol well yes, it's a vacuum line. But what's the pressure sensor for?
Can't quite tell from the option codes applicable to CJZD equipped vehicles.

[Le_Combattant]

Brake Vacuum Pipe Tube sensor.

Why ?
I don't know

[2226]

No hoses yet?

[Le_Combattant]

I received everything, I'm just waiting for this f*****g rain to stop.
It's been over 3-4 month it's raining almost every day.