Page 2 of 2
Posted: Tue Dec 04, 2007 3:03 am
by Dee-vub
Bepe wrote:and there going to be mine veedub, should be collecting sometime this week

yaaas good lad james! They are totally mint! Good buy mate

Posted: Tue Dec 04, 2007 7:52 am
by Bepe
collecting them tonight

will post pics up when i have fitted them, how easy is it taking seats out? what does it consist of?
Posted: Tue Dec 04, 2007 11:47 am
by h4r1s
Just a couple of bolts i'm guessing
Posted: Tue Dec 04, 2007 12:51 pm
by Tim_GTi
Bepe wrote:collecting them tonight

ah wicked, i checked them out there well nice, will suit your blue car too!!!
Posted: Tue Dec 04, 2007 6:02 pm
by alexperkins
To remove:
Put the seat fully back on the runners. Remove the allen key headed bolt and recover the nut
Then put seat fully forward on runners, and remove the end clip closest to the door side and the plastic guide on the other runner. Note this is very fragile, and can snap with little to no pressure.
Then put the seats all the way back on the runners and they will just lift out with some gentle persuasion.
Mind the grease though - its horrible stuff, and is a good way to make you need a replacement carpet fast!!
Posted: Wed Dec 19, 2007 12:51 am
by randy
Not been on for A while.
Getting car back next week hopefully after being off the road since august... if you dont know what happened then take a look at my previous posts!!
Car has been salvaged from the dead. Having spent a bit of cash on a gti conversion i wasnt going to just let the car go without a fight.
Patience has paid off. Will assess if the seat needs replacing when i get it back...
Pics of the car before and after will be posted soon...