Page 2 of 2
Posted: Thu Jun 05, 2008 8:18 pm
by Petar001
this are headlight that Dont come with harness ! !
and yes these 3 sets are for leds for rings !
and
you need to connect this to first light, not short light but on... (dont know the word)
Posted: Thu Jun 05, 2008 10:35 pm
by yosin
does anyone know where to stick the earths and live wires for these angel lights/??
Posted: Fri Jun 06, 2008 1:13 am
by Shmosh
^^ If you go onto club polo, there's a thread in the ice guide section on installing angel eyes into a 6n. scroll down to the penultimate post.
http://www.clubpolo.co.uk/forum/index.p ... pic=110114
i'm gonna do this next week when mine arrive! good luck.
Posted: Fri Jun 06, 2008 9:34 am
by Petar001
UH OK
On your connector from car for headlights !
you have in upper row 3 wires : brown: red/blue: yellow/black:
This is for leveling your lights !
and next row you have 4 wires
brown: white/black: yellow/black: grey/black: THIS is for
minus: long light : short light : side light
So RED wires connect to grey/black
and BLACK wires connect to brown !
That is it !
Posted: Fri Jun 06, 2008 12:26 pm
by yosin
o i c...
so to connect these wires would i just shave bit off the wire from quite high up behind the car loom and just use some electric tape to stick the live wires from the
angels on the wiring ?
and same goes for the earth
Posted: Fri Jun 06, 2008 12:49 pm
by Petar001
yes
Posted: Fri Jun 06, 2008 12:51 pm
by yosin
thanks dude gona do it now
Posted: Fri Jun 06, 2008 2:35 pm
by yosin
the lights levelling wont work right?
because on the angel lights there isnt 3 wires on the upper row?
or is that just my 1 >.<
Posted: Sat Jun 07, 2008 2:16 am
by JoeG07
mate you can undo those screws with just a normal ratchet screwdriver its a bit fiddly just get the right end for your screwdriver, have a look at the screw with a torch so you know where it is then just poke around till u get it
Posted: Sat Jun 07, 2008 3:07 am
by yosin
what screws do you mean? im confused
Posted: Sat Jun 07, 2008 11:46 am
by randomage
he means the ones that hold the headlights in
Posted: Sat Jun 07, 2008 12:17 pm
by yosin
o you was talking about them joeg07...sorry mate...ye i fiddled around it but when i was squeezin the screwdriver in i thought i might crack the hole where the bumper is =.=
Posted: Tue Jun 10, 2008 3:06 pm
by Shmosh
how did it go? my angel eyes arrived today and i'm gonna give it a go in a few days.
Posted: Tue Jun 10, 2008 4:14 pm
by yosin
hi mate...ye i have my angels on now and they are fine now apart from the fact that they dont fit in exactly as direct replacements of the lights..