Page 2 of 2

Posted: Tue Sep 16, 2008 7:27 pm
by Jackdcruz
ok cool, well thanks for all the help, its been very useful, i shall update the post once i have done it :)

Jack

Posted: Tue Sep 16, 2008 7:33 pm
by vw-po-low
Happy to help. :D

Update me on your progression.

Posted: Mon Sep 29, 2008 2:53 pm
by Jackdcruz
well did the head gasket wid a mate, went fine. Few problems tho, the oil pressure light is on, it went off for a bit, then i took it out, half way thru it came back on, so i crawled home. Its got plenty of oil tho which i dont get :S The engine is also tapping quite a lot, but it was before so dunno about that. Also did the cam belt, which we found had been 1 tooth out since i had it, so corrected it, but now it almost stalls as i start accelerating. Also couldn't undo the plug on the gearbox to put more oil in it as it was just too tight.

Not sure what to do, could throw it at the garage but scared of a big bill lol. Any ideas?

Thanks

Jack

Posted: Mon Sep 29, 2008 8:20 pm
by Jackdcruz
nobody? :(

Posted: Tue Sep 30, 2008 9:49 pm
by Hardcore
the tapping could be something to do with oil. have you got enough in? have you put too much in lol?? its your tappets wich normally tick when you run out of oil. thats all i know m8.