Coilovers(advice Needed)

Chat about your MKIV (6N) Polo
Andy1.6
Gold Member
Posts: 631
Joined: Thu Jan 24, 2008 10:01 pm
Location: Chichester, West Sussex Drives: 320d Touring

Re: Bargain Coilovers

Post by Andy1.6 »

Polo96CL wrote:
Naz wrote:ukno1tuning or hottuning on ebay will accept offers of 150 for coilovers so if anyones looking foa bargain!
Does anyone know what coilovers these are? Are they TA Technix (for £150 offer, thats a steal compared to over on CP!)?
Tim has them... ask him!
Naz
Bronze Member
Posts: 111
Joined: Wed Sep 06, 2006 2:13 pm
Location: Birmingham

Post by Naz »

im not 100% if they are TA TECHNIX or not- but as soon as they arrive i will post some proper pics of the coilovers.
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

Yes they are Darren. They arrive quicker than ClubPolo from my experience
User avatar
Polo96CL
Platinum Member
Posts: 1360
Joined: Wed Nov 14, 2007 4:13 pm
Location: Bromsgrove

Post by Polo96CL »

Oh cool, guess I might be putting an offer of £150 in sometime soon then...

Maybe when i've passed my test i'll treat myself :lol:
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

I didn't know you hadn't passed your test?!
User avatar
Polo96CL
Platinum Member
Posts: 1360
Joined: Wed Nov 14, 2007 4:13 pm
Location: Bromsgrove

Post by Polo96CL »

Tim_GTi wrote:I didn't know you hadn't passed your test?!
Haha for a good reason! I'll be going to all shows when i've passed, you have no idea how tempting it is having a car on your drive everyday which you want to drive anywhere - yet have to have an adult over 21 with 3 years experience :lol:

I heard from Alex P that the coilovers are a slag to fit Tim? I'm sure i'll be getting some advice from you and alex when the time comes to fit.
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

They're not really that bad actually. They just took me and him ages to fit. we had to trip to Halfords twice, we lost light about an hour later so we were working in porch light conditions, the GTi exhaust has to be removed to get the old strut out etc etc etc....

If you know what your doing, you've got all the tools and you have light it's not that bad.

The guide on here for the 6N is good, have a ganders
Naz
Bronze Member
Posts: 111
Joined: Wed Sep 06, 2006 2:13 pm
Location: Birmingham

Post by Naz »

Cool- So TA Technix for 161.99 Delivered! Apparently they arrive within a couple of days from Belgium!

Ill get some pics up of the coilies and some during the install! which will be done on the street!

do these Ta Technix come with built in Bump Stops?
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

Mine came inside a week, good customer service too. I complained about one of my rears possibly needing to be re-gassed and they just sent me a complete rear set for free within two days!

Yep they come with bumpstops, I used the ones from my old suspension though.
Naz
Bronze Member
Posts: 111
Joined: Wed Sep 06, 2006 2:13 pm
Location: Birmingham

Post by Naz »

how did you know that the rears needed gassing-Was this prior to Installing them?
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

The rear nearside strut was compressing alot more than the other. they were level, but when i had a full load it depressed alot further than the offside.
Naz
Bronze Member
Posts: 111
Joined: Wed Sep 06, 2006 2:13 pm
Location: Birmingham

Post by Naz »

hope i dont get any probs! just got to the top mounts in and wait for my mech to get back from hols and get her arse on the ground!

thanks for your input guys! seen your guys work and most of it is amazing!

ill hopefully start a progress thread- a slow one mind as ive her my olop for 3 years lol n aint done much! damn debt collectors! :evil:
wadders
Getting There!
Posts: 55
Joined: Wed Feb 06, 2008 11:09 pm
Location: Brighouse
Contact:

Post by wadders »

Could you post a link to the TA coilovers on eBay please?
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

wadders wrote:Could you post a link to the TA coilovers on eBay please?
Here you go mate:

http://cgi.ebay.co.uk/COIL-OVER-COILOVE ... 286.c0.m14

make an offer of £150.
wadders
Getting There!
Posts: 55
Joined: Wed Feb 06, 2008 11:09 pm
Location: Brighouse
Contact:

Post by wadders »

Cheers for that!

Offer accepted. Now I can get on with the 16v hubs with G60 brakes and lower it at the same time!
Last edited by wadders on Sat Sep 27, 2008 9:37 pm, edited 1 time in total.
Post Reply