Page 2 of 5
Re: CB's 9n progress thread.
Posted: Tue Mar 17, 2009 4:08 pm
by DanDiesel
Looking good mate! I used to have those rims on my Ibiza! Are they 6.5s or 7s?
Chewy: ET should be 43, and it is lowered. Just check the arch gap in the first pic to the second full on car pic, plus he said he'd fitted his coilies

Re: CB's 9n progress thread.
Posted: Tue Mar 17, 2009 4:16 pm
by chewy
DanDiesel wrote:
Chewy: ET should be 43, and it is lowered. Just check the arch gap in the first pic to the second full on car pic, plus he said he'd fitted his coilies

Me not reading the full thread again lol
Re: CB's 9n progress thread.
Posted: Wed Mar 18, 2009 12:58 pm
by captainbeyond88
i think they are the 7s, can't remember lol.
it needs to be alittle bit lower still. theres a bit too much arch gap for me but where i live at the moment my house is surrounded on all sides by speed bumps which i am almost scraping atm.
reckon i need a set of spacers thou, they're a bit tucked in for my liking.
thanks for the comments guys, anymore advice or comments are welcome!
not gonna be much work over the next month. needs the front repaired lol.
Re: CB's 9n progress thread.
Posted: Wed Mar 18, 2009 3:01 pm
by DanDiesel
Yeah i nice set of spacers on the back would do the trick!
I had 20mm hubcentric H&Rs on the Ibiza and they sat perfectly.
Re: CB's 9n progress thread.
Posted: Wed Mar 18, 2009 7:50 pm
by captainbeyond88
DanDiesel wrote:Yeah i nice set of spacers on the back would do the trick!
I had 20mm hubcentric H&Rs on the Ibiza and they sat perfectly.
sounds like a good plan, have you got a link for those?
Re: CB's 9n progress thread.
Posted: Wed Mar 18, 2009 9:41 pm
by Mr Rodriguez
lookin good mate, keep up the good work

Re: CB's 9n progress thread.
Posted: Thu Mar 19, 2009 12:33 pm
by DanDiesel
Well I bought mine from Rimstyle Autodesigns but it seems that they concentrate on alloy wheels and tyres only now so I can't give you a direct link
But give AMD Technik a ring on 01708 861827 and speak to Shaun or Patrick and they should be able to help you out!
Make sure you get the Trak+ spacers that bolt to the hub and then you bolt the wheel to the spacers! H&R also do 25mm varients which may be useful if your wheels are the 6.5 versions
Also you may like to try Venon Motorsport (01254 820005) and Awesome GTi (0161 776 0777). They should be able to point you in the right direction if they don't do them!
Re: CB's 9n progress thread.
Posted: Mon Mar 30, 2009 3:11 pm
by captainbeyond88
right well i've been thinking, what do you guys think of changing the colour of my roof?
i was thinking a gunmetal grey colour?
any ideas?
Re: CB's 9n progress thread.
Posted: Mon Mar 30, 2009 9:09 pm
by chewy
If your going to do it you need something contrasting, gray will be too dark.
Re: CB's 9n progress thread.
Posted: Tue Mar 31, 2009 1:03 am
by captainbeyond88
a lighter grey or silver?
Re: CB's 9n progress thread.
Posted: Thu Apr 02, 2009 10:44 pm
by chewy
captainbeyond88 wrote:a lighter grey or silver?
Aye that could work but would need the right colour to pull it off
Re: CB's 9n progress thread.
Posted: Sat Apr 11, 2009 8:53 pm
by captainbeyond88
well i was bored today so gave the car a clean.
thought i should post some pics of the damage to the front that's getting repaired next week thou!

Re: CB's 9n progress thread.
Posted: Sat Apr 11, 2009 8:58 pm
by RandonGUY
Nice.
Get a stubby aerial dude, how do you get under bridges with that telephone mast! lol
Re: CB's 9n progress thread.
Posted: Sat Apr 11, 2009 9:25 pm
by captainbeyond88
i like getting reception... the signal in my area is crap as it is.
Re: CB's 9n progress thread. *update 21/05/09*
Posted: Thu May 21, 2009 3:12 pm
by captainbeyond88
thought it was about time to do an update.
I finally got the car back from the bodyshop the other day and it is looking awesome imo.
Heres whats been done over the last few weeks.
Gloss Pillars
Badgeless grill with notch filled in
Colour coded lower bumpers
Detextured the front and rear bump strips
Colour coded rear badge
Still has a bit to go until the outside is done:
- Detexture and colour code side strips
- Colour code mirrors
- Colour code door handles
I've lowered it again and its all the way down now.
Other things to be done in the next few months:
- Fit shortened drop links (i've had them sitting in the box for the last month and need to get round to fitting them lol)
- Bonnet Bra (i know they are horrible but i'm not getting my paint all chipped after its just been done)
- LEDs
and that should do for the moment before I start saving for the boost.
Will get out for a proper shoot later next week me thinks.
let me know what you think!
thanks
mark