Page 2 of 2

Re: idle problem....

Posted: Sun Mar 22, 2009 7:58 pm
by snarloas
right located a vagcom device from the bay lucky enough a guy local was selling it. i done a scan a got the following 16585-16587 which is circuit malfunction on cylinder 1,2,3. from my experience im guessing that a coil pack needing replaced. am i right in saying that?
or would replacing the spark plugs maybe fix it? if so what do i look for as iv never done plugs before

Re: idle problem....

Posted: Sun Mar 22, 2009 9:52 pm
by alexperkins
Could well be a coilpack with a fault on that many cylinders, though check the leads are all in good nick first.

Re: idle problem....

Posted: Mon Mar 23, 2009 1:54 pm
by snarloas
i replaced one of the coils today, actually think its fixed will let you know in a few days when i use it a bit