Page 2 of 2
Re: Engine cover removal 1.4MPI
Posted: Wed Apr 21, 2010 10:30 am
by vwryan
rpm at idel is just under 1000
and getting a new fuel filter tomorrow, and ill try clean the throttle bodys today, anyone got pics of cleaning them not sure what to clean and what to use etc !
ryan
Re: Engine cover removal 1.4MPI
Posted: Wed Apr 21, 2010 11:55 am
by dub6n2
spark plugs may also be on their way out, might change them as well as they are not expensive
Re: Engine cover removal 1.4MPI
Posted: Wed Apr 21, 2010 12:05 pm
by dub6n2
vwryan wrote:rpm at idel is just under 1000
and getting a new fuel filter tomorrow, and ill try clean the throttle bodys today, anyone got pics of cleaning them not sure what to clean and what to use etc !
ryan
cleaning the throttle body : unplug the cable and all pipes ( make sure to mark them to remember where they should go) undo the 4 nuts holding it and pull it out ( make sure not to drop anything in the intake). use a carburettor/throttle body cleaner spray and spray it with it and wipe it with a clean lint free cloth. make sure you do not use any thing else as the butterfly is covered in a special coating so not to hold dirt on it an you could remove it. let it dry and do everything in reverse order. It is advisable you do a TBA using vagcom afterwards.
use something like this to clean it
http://image.gmhightechperformance.com/ ... leaner.jpg
some just spray it on the throttle body in place but I don not suggest that so not to let the dirt and grime go down the intake, apart that if you remove the throttle body you can clean it better
Re: Engine cover removal 1.4MPI
Posted: Thu Apr 22, 2010 12:10 am
by vwryan
aw spot on mate, thanks
going to get fuel filter orderd then ill get it cleaned thanks bruv !
ryan