Page 2 of 2

Re: What seats bolt into a 6N2?

Posted: Tue May 04, 2010 9:36 pm
by dub6n2
TimGti wrote:Whilst on the subject, has anyone tried collecting a new interior in their polo (ie fitting 2 front seats + a rear bench in the back with the seats down) or am I being a tad optimistic .... :lol: My only other option would be the TT! :shock:
fit a roof rack hehe :P

Re: What seats bolt into a 6N2?

Posted: Tue May 04, 2010 9:50 pm
by red6n2
my mate has done it in his 5 door 6n2.. had mk 3 leathers in there the other day... his name on here is OMS

Re: What seats bolt into a 6N2?

Posted: Tue May 04, 2010 10:46 pm
by alexperkins
Yes. You take all seats out par the drivers seat.

When collecting the new interior, you fit all but the drivers seat, then wrap the base of the drivers seat in a nice thick bag or similar to stop grease going everywhere, then seatbelt it in, or put the seats down and strap it in :)

Re: What seats bolt into a 6N2?

Posted: Tue May 04, 2010 10:54 pm
by TimGti
Nice idea, removing the old stuff before collecting the new! Do the front seats unbolt easily with just four bolts like my TT ones?... sorry Im being lazy as I havent even looked!

Re: What seats bolt into a 6N2?

Posted: Tue May 04, 2010 11:12 pm
by red6n2
alexperkins wrote:Yes. You take all seats out par the drivers seat.

When collecting the new interior, you fit all but the drivers seat, then wrap the base of the drivers seat in a nice thick bag or similar to stop grease going everywhere, then seatbelt it in, or put the seats down and strap it in :)

not gonna lie... the common sence is amazing ha ha !

Re: What seats bolt into a 6N2?

Posted: Tue May 04, 2010 11:42 pm
by dub6n2
TimGti wrote:Nice idea, removing the old stuff before collecting the new! Do the front seats unbolt easily with just four bolts like my TT ones?... sorry Im being lazy as I havent even looked!
aren't they just one bolt and slide back off? that's how mine are at least

Re: What seats bolt into a 6N2?

Posted: Wed May 05, 2010 7:20 am
by OMS
dub6n2 - Correct, push the seat all the way to the front and unclip the covers that cover the rails on either side of the seats these usually just pull off... then just push the seat back undo the hex nut and doneski! and then do what alex said, may need two of you one to slide the seat back and the other to whack some plastic bags on the seats to stop the grease getting everywhere! :D

Re: What seats bolt into a 6N2?

Posted: Wed May 05, 2010 8:05 pm
by red6n2
omeboy... your blatantly doing my seats when i get em ! :D