Page 2 of 10
Re: My Polo 1.0 E First Car
Posted: Thu May 31, 2012 7:04 pm
by mattskate
was it pretty easy fitting the front speakers? coz im thinking of gettin some replacesments for mine+crossovers and all that, seems pretty straight forward but thought id check in case i get in too deep or summin haha
Re: My Polo 1.0 E First Car
Posted: Thu May 31, 2012 7:46 pm
by Piers0930
Yeah its pretty straight forward but the only thing is that you have to snip the cable for the speakers as they have VW Connector, and a little bit of electrics/soldering would be very useful, I would be happy to help though.
Focal are extremely good mate!!
Re: My Polo 1.0 E First Car
Posted: Fri Jun 01, 2012 8:28 pm
by mattskate
Sweet yea one of my mates is an electrician and sound engineer so will probs get him to give me a hand to be on the safe side haha, but yea seems pretty simple really

Re: My Polo 1.0 E First Car
Posted: Wed Jun 06, 2012 10:17 pm
by mattskate
Piers0930 wrote:Yeah its pretty straight forward but the only thing is that you have to snip the cable for the speakers as they have VW Connector, and a little bit of electrics/soldering would be very useful, I would be happy to help though.
Focal are extremely good mate!!
also, may sound a bit of a stupid question but do u hav to wire the crossovers to an amp?
Re: My Polo 1.0 E First Car
Posted: Sat Jul 21, 2012 10:27 pm
by Piers0930
A Amp should have a cross over built into them! could LP filters and HP
Low Pass for Subwoofers 80hz -LP
High Pass for Fronts (Y) - HP
Done a few mods. Pictures soon.
http://images.copart.com/website/data/p ... 812_1X.JPG
should be getting this beauty, on monday. doing a GTI Conversion.
Haven't pass yet, oh well.
1.0 GTI

Re: My Polo 1.0 E First Car
Posted: Sun Aug 12, 2012 11:47 pm
by Piers0930
So
big update
Brought a Polo GTI and pinched the bits of it
Lowered on FK's Coilovers 60mm Going to try and convert to disc's
Full GTI Interior With Climatroic & Electroic Windows
GTI Splitter - Going to change Sidelight bulbs..
BIG THANKS TO BROTHER ROSS
Re: My Polo 1.0 E First Car
Posted: Mon Aug 13, 2012 11:01 am
by Piers0930
Forgot to add! New JL Subwoofer
Great thing about JL low watts and still great bass.

Re: My Polo 1.0 E First Car
Posted: Fri Aug 17, 2012 9:12 pm
by Piers0930
BAD NEWS GUYS.
SLUGGISH AS HELL. DRIVEN FRIENDS 1.0 AND GOD THATS QUICK

.
FOUND WATER IN OIL CAP AND LOOSING WATER.
HEAD GASKET GREAT
Re: My Polo 1.0 E First Car
Posted: Sat Aug 18, 2012 6:46 am
by TRiBaL
1.0 is already too slow. i imagine how sluggish is yours...
Re: My Polo 1.0 E First Car
Posted: Sun Aug 19, 2012 10:19 am
by Piers0930
Yeahhh, i no. but this one was better. my throttle response is bad. like a 1 secs delay. It must be down on compression or its the throttle body is faulty.
Re: My Polo 1.0 E First Car
Posted: Sun Aug 19, 2012 11:58 am
by TRiBaL
take out the whole throttle body and give it a good clean. this usually improves response when there is a lot of dirt gathered inside.
Re: My Polo 1.0 E First Car
Posted: Thu Aug 23, 2012 11:28 pm
by Piers0930
thanks mate, for your advice, yeah its pretty dirty, but i think it is still the head gasket, but yes i will still clean the body!
Update
Front GTI Breaks, and going to have rear discs hopefully
(Getting closer to a GTI Conversion :L)
My Polo 1.0 E First Car
Posted: Fri Aug 24, 2012 12:27 pm
by benmkiv
Just take it to a garage and get them to do a head test takes 5 minutes is an easy job and will give you a straight answer straight away.
Re: My Polo 1.0 E First Car
Posted: Sun Aug 26, 2012 6:51 pm
by Piers0930
Fitted a New aerial..
Aero Rear Wiper
waiting for a good SUMMER day to wax her
Does anybody no what you need for front Aero Wipers? I'm not looking for retro fitting ones.. thanks!
Thought i take her out for a ride in the fields...[/b]

REAR NEEDS DROPPING A BIT..
Re: Das Auto. Polo Muti Point Injection First Car
Posted: Sun Aug 26, 2012 10:01 pm
by x-luke-b-x
nice car mate, looking well
could you tell me how you fitted the electric windows? do you just need to install them and change the door wiring loom ?
or do you need the main wiring loom aswell?
,cheers
Luke