UK-POLOS.NET - THE VW Polo Forum

yes..

FriKkels, it is possible, but it is not correct. You can see in this post (takes to load images)
I think the arc joining the buttons do not fit well.
http://www.polovw.it/foro/viewtopic.php?f=59&t=22570

but then:
http://www.polovw.it/foro/viewtopic.php ... 68#p654583

FriKkels wrote:Thanks Ciclo,

One more Question, the display in my picture(the one with the fuel gauge on the bottom) is that the medium mfa or what is that called? I can scroll through some settings using the stalk.

Regards,

correct me if I'm wrong, I think same as that of chrispy. DIS.
Look in the user manual as it is called in English.

ciclo wrote:

FriKkels wrote:Thanks Ciclo,

One more Question, the display in my picture(the one with the fuel gauge on the bottom) is that the medium mfa or what is that called? I can scroll through some settings using the stalk.

Regards,

correct me if I'm wrong, I think same as that of chrispy. DIS.
Look in the user manual as it is called in English.

Hello ciclo,

I have a quistion hope u can help me.

I this right?

Re: 6R - Multifunction Steering Wheel Retrofit
Postby diskoboy » Tue Oct 07, 2014 3:25 pm

The LIN-BUS can also be found on T28a/16 (connector to the driver door LHD cars). Perhaps it's easier for some

And where to find this connector????

Many many thanxs!!!

Yes, that's right. (for RHD would be T28/16)

It is located in the connector on the driver's door.
For example, to LHD:

ciclo wrote:Yes, that's right. (for RHD would be T28/16)

It is located in the connector on the driver's door.
For example, to LHD:

Yessssss thank you ciclo,

Now i can install my mfs steering wheel.

It is easy then on the BCM.