UK-POLOS.NET - THE VW Polo Forum

federicodrdpro wrote:Hi! Polo 6R OEM thermo elements are very rare and more expensive. You can buy the Seat Toledo/ Skoda Rapid thermo elements for your Polo. They fit perfect in VW Polo 6R. I mounted them and they are perfect!

You can buy them here: http://www.skodaautoteile.de/shop/rapid ... 3001880736

They are the economic OEM thermo element you can buy for your Polo.

Thank you very much for the information (x1000).

CNK wrote: Did you have to iron seats after this retrofit?

...

RUM4MO wrote:

federicodrdpro wrote:Hi CNK , Do you mean if the seats have a different confort after mounted the heated elements?
The comfort is same of before.

No that is not what he meant, the English language - it can cause problems, "iron" in English = "ferro" in Italia ! ie ferro da stiro

Sincerely thanks for explanations (as ever), You know that although I am kidding too many times am a faithful follower of you.

RUM4MO wrote:

federicodrdpro wrote:Hi CNK , Do you mean if the seats have a different confort after mounted the heated elements?
The comfort is same of before.

No that is not what he meant, the English language - it can cause problems, "iron" in English = "ferro" in Italia ! ie ferro da stiro

Thanks! Now I undertsand
The seats after retrofit are like before. I didn't have to iron seats. The cloth is very tense and you don't need to iron the seats!

ciclo wrote: Thank you very much for the information (x1000).

You are welcome

federicodrdpro wrote:Hi CNK , Do you mean if the seats have a different confort after mounted the heated elements?
The comfort is same of before.

Hello, I mean something like this:

or

Cheers for the info. Where did you buy the buttons for the dash?

Sent from my XT1572 using Tapatalk

CNK wrote: Hello, I mean something like this:
...

Yes, I understand!
You don't need to iron your seats!

Asamoli wrote:Cheers for the info. Where did you buy the buttons for the dash?

Sent from my XT1572 using Tapatalk

I buy it from Aliexpress.

Federico

hmmmm heated rear seats. OEM

iichel wrote:hmmmm heated rear seats. OEM

Hahaha, rear heated? Yes, if mount the front heated is not enough for you

now if i pick up pizzas, i can only bring one because the passenger seat is only heated. with heated rear seats. imagine the possibilities.

Hello Guys

Few days ago I retrofitted heated seats. Everything works but I couldn't code the comfort module.
Can't see option about heated seats. My module is 6R0 937 087 H coding: 3CB029BF08A10000002808003D2B0CD80040000F60060000200000000000

Can someone send print screen with this option from vag com ?

Thanks a lot, Lukas

byte 15 bit 4, set to 1

What is this coding?

Activates the heated seats.
Usually it is active from the factory even if the heated seats are not installed.

Thank you guys, but still the same.

The reason why I'm trying to code the module is that the seats are working even when ignition is off.
If I understand well, module should send message "switch off" when I switch the ignition off.

This is how it's looks like my byte 15



Looks like bit 4 its active anyway.

Probably I'll change plus feed in fuse box.

Just tell me if I'm right

correct!

but officially the heated seats are on terminal 75, which is like a terminal 15. so it should be an ignition switched plus anyway!

Hi,
I did the retrofit as well and would thanks for all the info found here.
I'm now stuck with the same step than the one mentionned by Lukas : seats able to work while ignition is off.
I my case slot 47 was not feed in the fuse-box and the only free slots available were permenent plus.

I'm a bit lost on how to get electrical connection in a clean way with an ignition switched plus within the fuse box ??
Hoppe this isn't a to naive question.

Help would be greatly appreciated.