Page 2 of 4
Re: My Polo 1.2 TSI DSG
Posted: Sun Mar 08, 2015 5:07 pm
by thealbert
Plastic!
Re: My Polo 1.2 TSI DSG
Posted: Mon Mar 30, 2015 4:42 am
by ciclo
Please thealbert, can you show here the pictures about retrofitting dimming rearview mirror and light sensor? Thank you in advance.

Re: My Polo 1.2 TSI DSG
Posted: Mon Mar 30, 2015 12:37 pm
by ciclo
Re: My Polo 1.2 TSI DSG
Posted: Mon Mar 30, 2015 12:41 pm
by thealbert
Ok Ciclo, good job!
Re: My Polo 1.2 TSI DSG
Posted: Mon Mar 30, 2015 12:46 pm
by ciclo
Thank You. You did a good job with this installation.

Re: My Polo 1.2 TSI DSG
Posted: Mon Mar 30, 2015 6:02 pm
by thealbert
Thank you Ciclo!!!!
Re: My Polo 1.2 TSI DSG
Posted: Fri Mar 04, 2016 6:54 am
by thealbert
With Vogtland spring
Inviato dal mio SM-A500FU utilizzando Tapatalk
Re: My Polo 1.2 TSI DSG
Posted: Sat Jun 11, 2016 9:52 am
by thealbert
Next up....
Inviato dal mio SM-A500FU utilizzando Tapatalk
Re: My Polo 1.2 TSI DSG
Posted: Thu Jul 21, 2016 5:36 pm
by thealbert
6C1857507C
6C1857502H
6R0959801BD
6R0859802BF
6R1959565GREH
https://youtu.be/Ae_sobuO6Uc
Inviato dal mio SM-A500FU utilizzando Tapatalk
Re: My Polo 1.2 TSI DSG
Posted: Thu Jul 21, 2016 10:58 pm
by MichelKasapovic
Ebay MartinDK. Masser af forskellige slags. Koster næsten ingenting. Org. alu R Line eller GTI covers
Sent from my iPhone using Tapatalk
Re: My Polo 1.2 TSI DSG
Posted: Fri Sep 29, 2017 8:16 pm
by thealbert
New wheels

Inviato dal mio SM-A500FU utilizzando Tapatalk
Re: My Polo 1.2 TSI DSG
Posted: Sun Oct 01, 2017 4:54 pm
by ag69
very nice polo.
door lights are nice mod.
why did you make it above and not at the bottom of the door?
cant make it clear from the images but does door lights dont sit flush?
Re: My Polo 1.2 TSI DSG
Posted: Sun Oct 01, 2017 5:05 pm
by thealbert
I put them as the 4th golf series and are not thread-wise slightly
Inviato dal mio SM-A500FU utilizzando Tapatalk
Re: My Polo 1.2 TSI DSG
Posted: Fri Aug 24, 2018 1:27 pm
by thealbert
Re: My Polo 1.2 TSI DSG
Posted: Sat Aug 25, 2018 5:32 am
by ciclo
On the other hand, I remember that I bought the PDC button that you show in the image to compare the surface color with the original

, and that button does not have
PIN 5,
check it.
In such case, your PDC button
is not correct and you must buy the original one.
---
BTW1, your BCM feeds the lighting of those buttons through Terminal T73b/1. (olds BCMs)
BTW2, Thank you very much for the images. (the images stimulate to help

)