UK-POLOS.NET - THE VW Polo Forum

ciclo wrote:How to install automatic lights on a Volkswagen Polo 6R with halogen headlights w/o st/stp system (OEM)

https://drive.google.com/file/d/0B2nv91 ... sp=sharing

I just want to remember that I decided not to provide technical support for this installation because there are many factors to consider.
My time is very limited, I have no time for everyone.
Again, I apologize for this.

Will this Retrofitting also work for my polo 1.6 Tdi? without Start/stop?

Yep, this guide is an adaptation of the wiring for automatic lights. Low beam, and other lights, but not for the high beam.

By the way, this guide needs a deep revision, but I have not had time to do so since I did never need to do this adaptation because I have this wiring configuration from factory. I thought someone would.

Your previous question about highbeam stalk with HBA, when the project is finished I will publish all the information necessary to do it the same way. Everyone knows that I share the information. Meanwhile, if anyone wants to know more about important things of the project, at least he will have to make an effort of a 1% than I make to get information. With the clues it is extremely easy.

Some people that I know have information I need but they do not share for several reasons that I understand perfectly. However, they use or will use the information that I go to post for their own benefit.
I hope you understand what I say because it is my reason to not post all information yet. Furthermore, it is still not necessary.

I think that iichel and me are the only ones with this project at this moment in the earth planet...

yes we are a bit crazy. and busy. crazy, busy, crazy, busy.

but at least our 7E0 nightmares are a little bit over

iichel wrote:yes we are a bit crazy. and busy. crazy, busy, crazy, busy.

but at least our 7E0 nightmares are a little bit over

This mod is fascinating ...

hehe!... you have to say to this gentleman (iichel) that you are very easy to install ... and codify ...

I think that iichel and me are the only ones with this project at this moment in the earth planet...[/quote]






it´s okay Ciclo.. yes i know about yours modifications. and respect to you guys (specially ciclo and iichel ) for sharing it with us.. i have done some of them on my own 6R!(pics will come later) .

my current modification is to fix MFA+ Amarok tacho.

what i have done :
Replica Xenon lights
Glove light - (ⓒ Ciclo)
Rear Foot wheel light (ⓒ Ciclo)
Shark Antena
second + central trunk light (ⓒ Ciclo)
Pedal caps ( like in 6C)
Led licens light
Full led Taillight
Rns510
Bluetooth Premium
Gas strut for lifting of bonnet
Webasto heater
Mfa+ tacho from Amarok (Waiting)


my plan :

New Steering wheel
New bcm think it will be ( 7H0937089F ) og maybe the big one 090!
Fix auto light.
Oem Xenon
Pdc sensors Front and Rear.
Reversing cam in the vw logo
Black air nozzles
GTI rear bumper
black inside roof R/GTI

Alcantara seats(maybe)

it would be nice if it was possible to retrofit " Lane Assistant " and ACC cruise control ..

Ciclo if you had the time. would it then be possible to do the revision og the wiring diagram ?

Best Regards

if i could make a suggestion, if you already want to replace the bcm, why not the 7e0 version?
it's slightly more complicated to install but can do more things like the new facelift steering wheel. not sure how easy acc or lane assist is though.

it can do anything that 7H0---089/090 can do too. and probably the wiring for automatic headlights is the same

iichel wrote:if i could make a suggestion, if you already want to replace the bcm, why not the 7e0 version?
it's slightly more complicated to install but can do more things like the new facelift steering wheel. not sure how easy acc or lane assist is though.

it can do anything that 7H0---089/090 can do too. and probably the wiring for automatic headlights is the same

What is the part No? Will it just be plug and play Like the other?

it is 7E0 937 090 (read the last 20 pages of this topic to see how to fit and adapt)

iichel, you have an email with the solution

Marjacic, I will help you with your future mods, but right now I am very busy. Next year... (15-20 days)
Thank you very much for sharing the modifications in your car, please open a new topic to upload your car's images and share with us. I will actively participate in your new topic if you want it.
BCM 7E0 is the best for our 6R, until now, but you need to adapt the wiring from factory, each 6R is different and each case must be studied individually.

Meanwhile ... another one of my latest creations.



Previously requested by a mate in this forum.

Ciclo?
as i can se Skoda Fabia 5J drives with 6Q0953503EJ it´s almost look like 7E0 953 507B from the VW Transporter?
the question is more if it´s plug and play for our 6R and will the HBA function arm be the same like in your and iichel´s video?
i mean will it get back to position 0 when you put high beam on


Skoda Fabia : https://60.img.avito.st/640x480/1417741960.jpg

the 6Q0 will not return to center. look at the arrow, the rearward arrow is solid white. that means it will stay back. if it is only a white outline, it is returning to center.

the 6Q0 is the same part number as originally fitted on 6R.