UK-POLOS.NET - THE VW Polo Forum

Mart!n-GTI-DK wrote:

CNK wrote:I would like to retrofit a 12v socket in my trunk

I would love to have both sockets in mine.

Some time ago I bought this portable inverter, it works great for the laptop.

ciclo wrote:January 2, 2016
New mod High Beam Assist OEM

Logo for tshirts

ciclo wrote:

federicodrdpro wrote: Which is the part number of your Rear 12v SOCKET oem?

In rear side (cup holder) I used the original 12V socket from front side. 1J0919341H

Thanks! Which 12v fuse do you use for it?

iichel wrote: img]http://i.imgur.com/PVxP9ej.jpg[/img]

You're great. (in short)

federicodrdpro wrote:

ciclo wrote:

federicodrdpro wrote: Which 12v fuse do you use for it?

According ElsaWin diagrams you can install the two 12V sockets (U1-Cigarette lighter, U5-12 V socket) in the same wiring installation and use a 15A fuse. SB42 (original fuse in your car).

Today I installed the Steering wheel. It works but lighting buttons not work. Why? Which differences are there in new BCM? Coding?

Thanks for the information federicodrdpro, it is very valuable to me.
The problem is not coding or adaptation of the BCM, the problem is software.

I'm sure many enthusiasts that make mods to their Polo 6R will buy the BCM Max 7E0937090, however also many of them with BCM High from factory can buy BCM High 6R0937087T (2015 --->) to solve the issue of the backlight of buttons if they have no intention to make additional improvements.
https://www.uk-polos.net/viewtopic.php? ... 30#p498043

Thanks for the precious answer! Can I install the 7E0937090 ( Z4Y ?) In my Polo 6R without xenon?

P.S. I bought the VW Golf 7 RVC camera because it have the composite video signal. Do you know if is possible to change the golf 7 emblem with the Polo emblem? (Golf 7 emblem have a different design).

https://www.youtube.com/watch?v=KgaXrCBFWXk
https://www.youtube.com/watch?v=YVe5L_mfaOU

http://www.imagebam.com/image/4276f8474994222
http://www.imagebam.com/image/ca0bdf474993416
http://www.imagebam.com/image/029c55474993420
http://www.imagebam.com/image/1a96f9474993428
http://www.imagebam.com/image/947863474993435
http://www.imagebam.com/image/1d0f4b474993441

Is possible disassemble it?

Thanks Federico

federicodrdpro wrote:Today I installed the Steering wheel. It works but lighting buttons not work. Why? Which differences are there in new BCM? Coding?

The buttons lightning is swiching by LIN bus signal. The new type MFSW requres other signal. This is BCM firmware ability and couldn't be activited by coding. So there are two ways to solve the issue:
1) update the firmware of your current BCM
2) install the BCM manufactured after 04.2015

federicodrdpro wrote:Thanks for the precious answer! Can I install the 7E0937090 ( Z4Y ?) In my Polo 6R without xenon?

Yes, but you need to make changes in wirings and coding.
- Wirings BCM Max
- Wiring CAN_bus IC->BCM (BCMs 7E0)

federicodrdpro wrote:
P.S. I bought the VW Golf 7 RVC camera because it have the composite video signal. Do you know if is possible to change the golf 7 emblem with the Polo emblem? (Golf 7 emblem have a different design).

https://www.youtube.com/watch?v=KgaXrCBFWXk
https://www.youtube.com/watch?v=YVe5L_mfaOU

http://www.imagebam.com/image/4276f8474994222
http://www.imagebam.com/image/ca0bdf474993416
http://www.imagebam.com/image/029c55474993420
http://www.imagebam.com/image/1a96f9474993428
http://www.imagebam.com/image/947863474993435
http://www.imagebam.com/image/1d0f4b474993441

Is possible disassemble it?

Thanks Federico

I have no information about this. Sorry.

Thanks for the answer! You are too helpfull

I am very thinking about change the BCM with the 7E0 version. But I don't know if this is the best solution for me.
I love do the retrofits in my Polo
Before I decide to buy a 7E0 version of BCM , I would know the wirings changes and which are the possible retrofit with 7E0 version of BCM in a VW Polo.

P.S. For the VW Golf 7 badge, I work on it next week and post the result here

firegrafik wrote:

federicodrdpro wrote:Today I installed the Steering wheel. It works but lighting buttons not work. Why? Which differences are there in new BCM? Coding?

The buttons lightning is swiching by LIN bus signal. The new type MFSW requres other signal. This is BCM firmware ability and couldn't be activited by coding. So there are two ways to solve the issue:
1) update the firmware of your current BCM
2) install the BCM manufactured after 04.2015

Hi Firegrafik, thanks for the answer and for the MP. I am thinking to change BCM, but I don't know if this is the best solution for me.

Federico

federicodrdpro wrote:......
Before I decide to buy a 7E0 version of BCM , I would know the wirings changes and which are the possible retrofit with 7E0 version of BCM in a VW Polo.
......

There is report concerning 7E0937090 BCM intergration on Polo from Russian Polo owner
https://www.drive.net/l/9344124/

You could also read mine reports
https://www.drive.net/l/7318540/
https://www.drive.net/l/8632361/
https://www.drive.net/l/9309752/

firegrafik wrote:

federicodrdpro wrote:......
Before I decide to buy a 7E0 version of BCM , I would know the wirings changes and which are the possible retrofit with 7E0 version of BCM in a VW Polo.
......

There is report concerning 7E0937090 BCM intergration on Polo from Russian Polo owner
https://www.drive.net/l/9344124/

I guess that this information is derived from my creations. Not right for Polo 6R Europe, are missing some important details* and others are not necessary.
However it seems me well to have a rough idea of what to do.

*details that must be corrected in the future if he install other equipment. So he will work twice.

Thanks for the answer. Now I study it.

P.S. A question about the RVC tube. Do you used 5K6 827 861 tube like in your guide? Because it seems short

federicodrdpro wrote:Thanks for the answer. Now I study it.

You have to study this link in depth and detail. viewtopic.php?f=62&t=67799#p505742
I insist, not for sale. (this only is for sale when I have time to provide tech support, not at this time, sorry)

federicodrdpro wrote: P.S. A question about the RVC tube. Do you used 5K6 827 861 tube like in your guide? Because it seems short

No. I bought 50 meters for the drain pipe in a ebay shop from UK, also the rubber grommets... I dont have the links and I dont remember the measures, again sorry.

Hello
Anyone know if the radio 3Q0 035 874 Polo 6C is compatible with Polo 6r?
Thank you