UK-POLOS.NET - THE VW Polo Forum

That's what i tough! Thanks!

[quote="iichel"
It will not be listed but i'm sure some people here, including myself, will be able to assist you with it.[/quote]
That's great, will let you know how I get on

Adam87 wrote:Great news ciclo [emoji106] I have a my15 T5 highline and will be retrofitting lane assist, bi-xenons, RLS, heated seats etc , I see that you retrofit the t6 BCM into the polo (7E0 937 090), will it work with xenons? Yes, perfectly. All I can see in etka is listed with halogen or led. Also Is there anything extra in instrument cluster to add? I believe there is no convenience menu? It only add a menu for driving assistants (when they are installed, I guess) .I have this cluster installed. Nice

Adam87 wrote:Thanks for the reply iichel, would you say to use coding from 7H0 bcm for xenons or will it be listed in long coding? No problem. Is there any specific prefix after part no 7E0 937 090 * ***? Yes, uses this PDF to choose according factory equipment of your T5, and choose 7E0 BCM it has all the functions of your T5 Highline and those you want to add. I would choose the best.
Thanks

Adam87, you know, more information means more help.
Do you have pictures of your T5 (interior and exterior)? Any link to another forum?

iichel wrote:It will not be listed but i'm sure some people here, including myself, will be able to assist you with it.

ORiOn wrote:Hey guys!

Is it possible to install original bi-xenons an a polo with 6R0937087B BCM?

Thanks!

The best to run correctly xenon headlights is to install one BCM Max. It is now much easier.
Any other option is undoubtedly worse.

Thank you ciclo, with regards the options list, do I have to write all the codes down and make a list or can I order a max bcm that is capable of all? My T5.1 GP is a highline so already has cruise, powerfold heated mirrors, elec Windows, front fogs,AC and I have had the new cluster fitted
Have now fitted roof rails and side bars since this pic




Sent from my iPhone using Tapatalk

Also want to fit auto distance reg aswel [emoji6]


Sent from my iPhone using Tapatalk

The more important thing is that the new 7E0 BCM is suitable for Central locking frequency (MHz) and for tail doors (rear wing doors , sorry I do not know as they say in English)
For everything else you can choose (and highly recommended) the BCM that it is capable with all equipment available.(PR-codes A8M, A8Z)

ACC? (I also want it ) but perhaps a new ABS/ESP unit with appropriate software is required, also other units. I do not know for sure because my knowledges are limited about ACC, but it sure is an expensive modification.

ciclo wrote:The more important thing is that the new 7E0 BCM is suitable for Central locking frequency (MHz) and for tail doors (rear wing doors , sorry I do not know as they say in English)
For everything else you can choose (and highly recommended) the BCM that it is capable with all equipment available.(PR-codes A8M, A8Z)

ACC? (I also want it ) but perhaps a new ABS/ESP unit with appropriate software is required, also other units. I do not know for sure because my knowledges are limited about ACC, but it sure is an expensive modification.

433mhz is ok I'm guessing, which pr code is the highest spec? Or what is the difference between them?

I had a courtesy t6 with acc and now I want to fit [emoji3] I did take an autoscan of it aswel [emoji6], I think definitely BCM, maybe ecu and abs?

434 MHz

7E0937090A Z0J ...8IT+7Y1+8T0,8T1,8T2,8T3,8T5+3RD,3RE,3RF,3RG
or
7E0937090 Z4Y ... 8IT+7Y1+8T0,8T1,8T2,8T3,8T5+3RB,3RC,3RP

Check which fits with your T5.

I also have several T6 autoscan with all possible configurations, without CCS, with CCS on stalk, with CCS on MFSW buttons, with ACC, etc...

Ace [emoji106], it's the first one I need, will that support lane assist do you know? I can see it in the codes, I can send you the t6 autoscan if it helps you in anyway?
Can you help with coding to get mirrors to fold on key? Which number in LC do I need to change?


Sent from my iPhone using Tapatalk

Hi Ciclo,

I want to tell you how happy I am with the ch/lh and cables for BCM MAX! Everything works just fine without errors and stuff thanks again! This is for the people ho want to do also a BCM Max retrofit Ciclo is THE Polo Doctor!!!

Thanks man for all the help!

Spolos

Spolos wrote:Hi Ciclo,

I want to tell you how happy I am with the ch/lh and cables for BCM MAX! Everything works just fine without errors and stuff thanks again! This is for the people ho want to do also a BCM Max retrofit Ciclo is THE Polo Doctor!!!

Thanks man for all the help!

Spolos

Absolutely! He knows everything! Ahah

edit

edit 2

ciclo wrote:

This is a small part of my big project, the best is yet to come. Patience.

Ciclo, why do you change this mirror with 7E0 857 511 G mirror? HBA not work with 1K8 857 511 mirror?

federicodrdpro wrote:

ciclo wrote:

ransonneil wrote:Is it The rear view mirror?

@ransonneil Brilliant!



This is a small part of my big project, the best is yet to come. Patience.

Ciclo, why do you change this mirror with 7E0 857 511 G mirror? HBA not work with 1K8 857 511 mirror?

Yes, it works only with PQ35 BCM (e.g Golf 5, Golf 6).
Polo 6R has got PQ25, so ciclo used mirror from VW T6