UK-POLOS.NET - THE VW Polo Forum

vc-10 wrote:Hmmm fiddling with airbags is something I'd be really worried about. You'd need new side airbags in the front seats too, as the standard ones have a combined head/thorax airbag that goes up to the roof.

Exactly.

Side airbag for front seats:
PR-code 4X1 without curtain airbag
PR-code 4X3 with...

iichel, very expensive retrofitting.

For assembly Elsawin. It seems easy to do by following the instructions carefully.

Ah allright, I didn't know the seat airbags included side protection for the head. In that case, I'll stick to the airbags that I have now.
Retrofitting with new seat and head airbags, and a new control module (4X3) seems a bit expensive indeed, with limited added value.

ciclo wrote:

Bachecco wrote:Hi ciclo, i have recieved the resistors for rear led turn light . Where i connect it?

LOL!

Taillights connector:

Left
T6/3 White/Black wire
Right
T6/4 Green/Black wire

I have connected the resistance as you told me but the situation is still the same, the arrows light blinks fast on the instrument panel and it appears burned out lights lamp.
Also the resistors don't seem to warm up

Right





Left

try like this

Bachecco wrote: I have connected the resistance as you told me.

, you have not connected the resistors as I told you.

The electric current always flows through the place of least resistance. Like the water.
If you do not cut the cables and interleaves the resistor is the same as doing nothing.

iichel wrote:try like this

...

firegrafik's video. (He still has to change the stalks, but before I think he will try to do another thing... )



OEM installation = excellent results.
firegrafik, probably you'll not want to have a car without HBA in the future.

I wonder if it would be possible in the 6C. Perhaps it is even easier to do.

I heard that the Polo 6C is even more difficult to code than the good old Polo 6R. But it would be nice, for sure. It shares many components with the Golf 7 so the mirror and stalks could fit!

iichel wrote:I heard that the Polo 6C is even more difficult to code than the good old Polo 6R. But it would be nice, for sure. It shares many components with the Golf 7 so the mirror and stalks could fit!

Perhaps this would help.

lol

you still have to show me how good your t-shirt fits

Hello


For T73A pins from 17-37 is used this connector right ? (Better ask )



and one more question Parking Lights T73b ---> T14/12 (in lamp)
and

DRL T73b/3 ---> T14/10 (in Lamp) , use the same LED module ?


Best Regards Chriss

RekinPoznan wrote:Hello


For T73A pins from 17-37 is used this connector right ? (Better ask )

.....

I always use this report
https://www.drive2.com/b/1664258/
Very helpfull

ciclo wrote:firegrafik's video. (He still has to change the stalks, but before I think he will try to do another thing... )

.....

OEM installation = excellent results.
firegrafik, probably you'll not want to have a car without HBA in the future.
.

Thank you! Maybe you are right - it will be hard to refuse such options in the future

firegrafik wrote:

RekinPoznan wrote:Hello


For T73A pins from 17-37 is used this connector right ? (Better ask )

.....

I always use this report
https://www.drive2.com/b/1664258/
Very helpfull

Firegrafik Many thanks never see before this manual thanks

RekinPoznan wrote:Hello

For T73A pins from 17-37 is used this connector right ? (Better ask )

and one more question Parking Lights T73b ---> T14/12 (in lamp)
and

DRL T73b/3 ---> T14/10 (in Lamp) , use the same LED module ?

Best Regards Chriss

Yes.

Info:
https://drive.google.com/folderview?id= ... =drive_web
https://drive.google.com/file/d/0B2nv91 ... J3YWM/view


Terminals
http://www.a4-freunde.com/showwiki.php? ... uebersicht

Terminals BCM PQ25, T73 connector:
http://www.a4-freunde.com/attachment.ph ... 1415539780
http://www.a4-freunde.com/attachment.ph ... 1415951045
http://www.a4-freunde.com/attachment.ph ... 1415951353
http://www.a4-freunde.com/attachment.ph ... 1415009194

ciclo wrote:

RekinPoznan wrote:Hello

For T73A pins from 17-37 is used this connector right ? (Better ask )

and one more question Parking Lights T73b ---> T14/12 (in lamp)
and

DRL T73b/3 ---> T14/10 (in Lamp) , use the same LED module ?

Best Regards Chriss

Yes.

Info:
https://drive.google.com/folderview?id= ... =drive_web
https://drive.google.com/file/d/0B2nv91 ... J3YWM/view


Terminals
http://www.a4-freunde.com/showwiki.php? ... uebersicht

Terminals BCM PQ25, T73 connector:
http://www.a4-freunde.com/attachment.ph ... 1415539780
http://www.a4-freunde.com/attachment.ph ... 1415951045
http://www.a4-freunde.com/attachment.ph ... 1415951353
http://www.a4-freunde.com/attachment.ph ... 1415009194

Thanks Ciclo , have all terminals , tomorrow rewiring instalation , and add auto switch.

Best Regards Chriss