Absolutely YES. Follow the installation guide faithfully Tue Nov 29, 2016.
CNK wrote: Wed Aug 08, 2018 12:34 pm
3. Do you have a list of parts needed to make an wiring to RLS? I have 8-pins connector in my HBA mirror + RLS sensor.
No, ... in September I could help you with this, now I'm on vacation.
Re: CNK's Polo 6R 1.4 Shadow Blue
Posted: Tue Aug 14, 2018 6:43 pm
by CNK
Ok, have a nice summer vacation!
I think in this week I will have all parts need to RLS/mirror.
Can I use this wires also to connect mirror (marked in black square)?
HBA wire from ciclo:
Re: CNK's Polo 6R 1.4 Shadow Blue
Posted: Tue Aug 21, 2018 7:54 am
by CNK
Hello, do you know how to check if WRM is correct?
Eg. I found WRMs from Polo 6C GTI 2016 2-doors ( WVWZZZ6RZGY252505 ) with folding mirrors:
- 6R0959801DK (front left) - https://imgur.com/dpbytX8
- 6R0959802DM (front right) - https://imgur.com/5JAiSkh
right was connected to mirror 6C2857502K
i read sometimes polo 2-door has the motors from 4-door from factory, but how can I check if they match to my 5D 6R?
CNK wrote: Tue Aug 14, 2018 6:43 pm
Can I use this wires also to connect mirror (marked in black square)?
Yes. It's what you must do.
CNK wrote: Tue Aug 21, 2018 7:54 am
In ELSA's scheme to rear mirrorr from T6 (https://imgur.com/ouStb6M) there is no LED, is it necessary? If it's must have, what is type of this diode?
T6
It is necessary. This diode is not present in our 6R dome lights.