UK-POLOS.NET - THE VW Polo Forum

Posted: **Sun Oct 30, 2016 6:17 am**

CNK wrote: Going back to our last conversation...
...can anyone confirm, that windshield from Polo 6RU Sedan fit to Polo 6R Hatchback?

Heated windshield

+ RLS retaining plate from factory... good for Poland.

(it is possible electrically)

I have checked on ETKA online but it's hard to know unless someone has done this mod. The Ref number would be 6RU845011J (it should be measured with extreme accuracy to compare with your current windshield

)

Maybe your best option would be the windshield from Polo 6C.

Posted: **Sun Oct 30, 2016 7:50 am**

Hello Ciclo,
What do you think about Front Assist upgrade I know its other platform. I have checked my current GW and I have option 13 Auto Dist. Reg. The automatic braking would most likely not work with my current ESP. But maybe at least the warning messages would go through BAP to the MAXI dot. What do you think would it be worth a test? If you know can you advise which radar unit would be best suitable to do the testing?

Posted: **Sun Oct 30, 2016 10:56 am**

Hi Japfan.
I don't know anything of these issues. I'm sorry. However I am aware that there are several users who are gathering information from all these issues ...
By my side, I have yet to learn a lot about the units for ABS, engine and radar (ACC/Front Assist -city-/etc...).

Posted: **Sun Oct 30, 2016 11:07 am**

My confirmation to firegrafik:
My BCM

Posted: **Sun Oct 30, 2016 11:17 am**

I also made a picture of my fuse box (I forgot to make it when I upgraded my wiring looms)

diagram from here

Posted: **Sun Oct 30, 2016 12:53 pm**

firegrafik wrote me, that his new BCM from T6 which I sent to him works great with LED headlights

Posted: **Mon Oct 31, 2016 8:02 pm**

ciclo wrote:Hi diskoboy, as can be seen this installation (process) is for a VW Transporter T5.2 (7L3) non Bluemotion, so that the full installation for your 6R BMT with external Gateway would be different.

Many parts of your current installation (with automatic lights) can be used, but first you have to carry all signals from your external Gateway to the 7E0 BCM (Internal Gateway)
iichel did this process (installation) under my recommendation to get that HBA system was recognized through IC CAN-lines. (in case you want detailed information about it)

Elsawin or Erwin would solve all your doubts about the pin assignment and correspondence. (External Gateway & other units to new 7E0 BCM)

After that, follow this diagram. IIRC w/o Front foglights in your case.

In ElsaWin.. what model / year should I've look at?

Posted: **Sat Nov 05, 2016 11:08 am**

sorry for the offtopic but I would like to know where to buy the tape for car at a good price
Thanks!

Enviado desde mi LG-H815 mediante Tapatalk

Posted: **Sat Nov 05, 2016 12:48 pm**

I am very satisfied with this one: https://www.aliexpress.com/item/1-Pcs-1 ... 696fd76364

Posted: **Sat Nov 05, 2016 11:02 pm**

iichel wrote:I am very satisfied with this one: https://www.aliexpress.com/item/1-Pcs-1 ... 696fd76364

Thanks!

Enviado desde mi LG-H815 mediante Tapatalk

Posted: **Sun Nov 06, 2016 7:03 pm**

This is the best fabric tape Select your language

Also coroplast.

Posted: **Sun Nov 06, 2016 7:08 pm**

Enlarge

Posted: **Sun Nov 06, 2016 7:11 pm**

diskoboy wrote:
ciclo wrote:Hi diskoboy, as can be seen this installation (process) is for a VW Transporter T5.2 (7L3) non Bluemotion, so that the full installation for your 6R BMT with external Gateway would be different.

Many parts of your current installation (with automatic lights) can be used, but first you have to carry all signals from your external Gateway to the 7E0 BCM (Internal Gateway)
iichel did this process (installation) under my recommendation to get that HBA system was recognized through IC CAN-lines. (in case you want detailed information about it)

Elsawin or Erwin would solve all your doubts about the pin assignment and correspondence. (External Gateway & other units to new 7E0 BCM)

After that, follow this diagram. IIRC w/o Front foglights in your case.
In ElsaWin.. what model / year should I've look at?

Erwin...VW T6 (2016-2017)

Posted: **Sun Nov 06, 2016 7:24 pm**

How to install 7E0 BCM in a 2012 6R (RHD)

Posted: **Sun Nov 06, 2016 9:19 pm**

ciclo wrote:This is the best fabric tape Select your language
Also coroplast.

You can also buy it in local shops with electronic parts (where you are buying soldering iron, wires etc.)

or... if you love your local car dealership, you can order this: D 422 S25 A2 or 000 979 950 (however, the price will be several times higher)

100% OEM

UK-POLOS.NET - THE VW Polo Forum

ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: RE: Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.