I keep armrest in 3rd position from bottom (3 clicks).
This is a picture taken with hand brake at 4th position (4 click).
Is that's OK?
Thanks
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sat Jun 13, 2020 7:16 pm
by iichel
Take care that the handbrake levers at the rear brakes are in rest, when the handbrake is down, and start to move as soon as the handbrake lever in the cabin is moved.
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sat Jun 13, 2020 8:11 pm
by Franciswat
That was exactly my mistake. This afternoon after 4 km I noticed smoke from rear disk. Handbrake was partially inserted.
I corrected the regulation. Now with 4 click car is braked. I do not have to use force to get 4th position. It that as it's supposed to be?
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sat Jun 13, 2020 8:16 pm
by iichel
I feel some force just before the 1st click
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sun Jun 14, 2020 6:21 pm
by Franciswat
Did you replace the handbrake itself as well?
In found there is different handbrake for rear drum and disks. Actually I changed only the cables.
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sun Jun 14, 2020 6:56 pm
by iichel
jep I did change the handbrake lever, they are different between rear discs and drums.
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sun Jun 14, 2020 7:01 pm
by Franciswat
Thank you. I will change it next week.
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Mon Jun 15, 2020 1:10 am
by Franciswat
Good morning guys, I'm trying to find on forum that information but I'm still not sure about the answer.
I suppose my car doesn't have diversity antenna system because It doesn't have twin AM/FM connector.
In this case If I want to use a DAB radio I only need to change the AM/FM antenna on the roof with an AM/FM + DAB antenna or need something more?
... you will need the DAB antenna cable from the antenna base to the black connector on the head unit.
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sat Jun 27, 2020 12:09 am
by Franciswat
Thanks Fernando, I got all needed wirings and antenna. I will post updated soon.
Today CC emulator installed in my bifuel.
Thank you Slavik who helped me to solve some issues.
Still can't use at 100% without GRA High and package with GRA High emulator is blocked in Russia since 3 weeks.
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Sat Jun 27, 2020 11:18 am
by ciclo
Regarding the shipment of the Gra High emulator, you should bear in mind that Russia is a country of great extension, and the shipments usually take the same time to reach the starting point from Russia as the trip across Europe, ... and that traceability events are only updated when new events arrive.
I remember once sending small parts to firegrafik for him to receive in a week or two, but the traceability made the envelope go around the world (I mean on the other side)... taking two months or so.
It was something exceptional, the usual is three/four weeks.
Re: Franciswat's Polo 6R 1.6 Bifuel
Posted: Fri Jul 03, 2020 5:58 pm
by Franciswat
ciclo wrote: Sat Jun 27, 2020 11:18 am
I remember once sending small parts to firegrafik for him to receive in a week or two, but the traceability made the envelope go around the world (I mean on the other side)... taking two months or so.
It was something exceptional, the usual is three/four weeks.
Thank you ciclo, that gives me some hopes. Shipment was done on 19th May and it's holding in board shipment center (Vnukovo) since 22th of May.
Probably the delay was mainly due to the covid-19.
I'm looking to buy a mirror switch such as your (6C model) on AE.
Can you please suggest me how to recognize VW genuine products?
I think too cheap one are not genuine (ie 10 € including shipment is probably fake).