Page 3 of 5
Posted: Tue Sep 11, 2007 10:19 pm
by Tim_GTi
JPR_polo_gti wrote:I do believe the size is regulated and you're likely to get fined if you made it smaller.
i thought that too, but the amount of cars i see driving round with smaller ones makes me wonder........
Posted: Tue Sep 11, 2007 11:18 pm
by Dee-vub
JPR_polo_gti wrote:I do believe the size is regulated and you're likely to get fined if you made it smaller.
Im not if kipper means making the actually lettering and plate smaller or if he basically means the equivalent of chopping the ends off?
Well it would be illegal if you canged the spacing or size of lettring, but if you kept the spcing and sizing the same but just shortened the plate, then that wouldnt be a problem.
Posted: Tue Sep 11, 2007 11:20 pm
by ModifiedMadness
You're right Phil, the most he can do legally is get some cut of each end.
There has to be a certain gap between the end and the first/last letters though
Posted: Sat Sep 29, 2007 5:47 pm
by kipper
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=003
have a look at these lights and tell me what u think.
i asked him if theyd fit my car but he said no. is he right cause i thought my car and this one are the same lights?
theres also these lights......
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=010
unless someones selling some tinted lights for the polo?
Posted: Sun Sep 30, 2007 1:44 am
by Bepe
they will fit, will just have to buy the mk4 bulb holders iirc? basically the oppositte to mk4 owners wanting mk5 rears?
Posted: Sun Sep 30, 2007 9:47 am
by NOZ
kipper wrote:was wondering, removing the bump strips but as its held on by rubber sticky stuff once i removed the strips i need to remove the sticky stuff with ease without removing the paint. any one know wat i can use?
Think your talking about the strips along the doors? If so, use methanol spirit with a cloth and scrub it off. Its gonna kill your arm but unless you really scrub the spirit in the glue, it won't flex and come off.
Posted: Sun Sep 30, 2007 10:22 am
by carerra91
NOZ wrote:kipper wrote:was wondering, removing the bump strips but as its held on by rubber sticky stuff once i removed the strips i need to remove the sticky stuff with ease without removing the paint. any one know wat i can use?
Think your talking about the strips along the doors? If so, use methanol spirit with a cloth and scrub it off. Its gonna kill your arm but unless you really scrub the spirit in the glue, it won't flex and come off.
or you could invest in a toffee wheel (not sure if thats the correct term). its a small rubberesque drill attachment that you go over the sticky stuff with and it pretty much whips it off. it takes out all the graft but does the job just as perfect. i used to have a 'wurth' one and it worked like a charm.
Posted: Sun Sep 30, 2007 12:08 pm
by ModifiedMadness
You'll then have to fill the holes left behind them.
Posted: Sun Sep 30, 2007 2:27 pm
by NOZ
ModifiedMadness wrote:You'll then have to fill the holes left behind them.
Luckily thats a job I didn't have to do
That drills more expensive then £2 at the shops but i know some cars do get left with really stiff glue left at the edges. I sanded the top layer away then used the spirit for them bits. The drills probably better for that though- just don't ruin the paint whatever you do
Posted: Sun Sep 30, 2007 11:16 pm
by kipper
drillls arnt a problem, being a qualified carpenter i got 3 cordless and 2 corded. but its all done now and im sure youve all seen and hopefully the front bumper will be done thsi week sometime to.
another thing, if ur not allowed to change the lettering how come i seen cars with smaller lettering on the number plate?
Posted: Mon Oct 01, 2007 1:50 am
by NOZ
Just ain't bothered about getting caught I guess. There's so many cars with aftermarket plates on too that the cops don't pull you up unless they really feel like it. I was following a copper once following a car with illegal plates (white plate on the back with italic font) and not bother. However, on their bad days they certainly will and you wouldn't want it to be you.
Posted: Mon Oct 01, 2007 10:50 pm
by kipper
anyone know if black tinted angel eyes wouldl fail an mot or if theyll pass? same with tinted rear lights and dark side indicators front and side.
also where u can get replacement rings and bulbs for the angel eye lights?
Posted: Tue Oct 02, 2007 12:01 am
by sorted
How did you smooth the bumper ?
Neildo
Posted: Tue Oct 02, 2007 12:04 am
by kipper
with body filler and some mesh to cover the holes but have been told this isnt that good as it can crack......... well just have to see when its done tho.
Posted: Tue Oct 02, 2007 6:42 pm
by kipper
someone must know the answer to my questions about the lights and angel eyes? or do u think i should go for clear angel eyes?