Page 3 of 5

Re: CB's 9n progress thread.

Posted: Thu May 21, 2009 11:10 pm
by chewy
Looking good, some nice subtle mods :D

I don't suppose you can remember the part number for the pillar trims

Re: CB's 9n progress thread.

Posted: Thu May 21, 2009 11:52 pm
by captainbeyond88
chewy wrote:Looking good, some nice subtle mods :D

I don't suppose you can remember the part number for the pillar trims
for 3 doors:
6Q3 837 901 G 041
6Q3 837 902 G 041

for 5-doors (on front doors):
6Q4 837 901 G 041
6Q4 837 902 G 041

there you is! i'll post these in the common mods sticky too.

Re: CB's 9n progress thread.

Posted: Fri May 22, 2009 4:32 pm
by chewy
Will have to get them ordered soon the g/f has ruined the ones that are on

Re: CB's 9n progress thread.

Posted: Wed May 27, 2009 1:29 am
by captainbeyond88
Had a play with photoshop effects this afternoon. tell me what you think!
Image

Re: CB's 9n progress thread.

Posted: Wed Jul 22, 2009 8:50 pm
by captainbeyond88
a few updates, the outside is getting there!

LED interior light
Image

LED no. plate lights
Image
Image

currently not had any problems with them and they have been in for about 2-3 months.

Colour coded handles
Image

Colour coded wing mirrors
Image

other than that not much else. got my side strips sitting ready to be put back on again after putting them on with rubbish halfords stuff and they came off within a couple of days :evil:

Re: CB's 9n progress thread.

Posted: Fri Jul 24, 2009 12:31 pm
by mwbpsx

Re: CB's 9n progress thread.

Posted: Sat Jul 25, 2009 1:59 pm
by captainbeyond88
thanks man, have posted a couple of questions on that thread.

Re: CB's 9n progress thread.

Posted: Sat Jul 25, 2009 7:59 pm
by jaydeezey
Hi mate, could you please tell me the size and type of bulbs used for the interior and No plate lights. Thanx in advance. :)

Re: CB's 9n progress thread.

Posted: Sat Jul 25, 2009 8:43 pm
by captainbeyond88
jaydeezey wrote:Hi mate, could you please tell me the size and type of bulbs used for the interior and No plate lights. Thanx in advance. :)
i think off the top of my head it was:
42mm length for the interior
2 x 37mm for the outside

but just check to make sure.
i used the ones with 6 leds on throughout but the ones for the no plate were a bit of a squeeze, they have to go in at a bit of an angle
Ultraleds.co.uk are your best bet

Re: CB's 9n progress thread.

Posted: Sun Jul 26, 2009 11:45 am
by mwbpsx
Just had a thought !!!! while uve got the lamps out change the indicator bulbs for the chrome ones.....
gets rid of the orange reflection but still flash amber

Re: CB's 9n progress thread.

Posted: Mon Jul 27, 2009 12:57 pm
by captainbeyond88
good plan will do that! just waiting atm to hear back from ultraleds

Re: CB's 9n progress thread.

Posted: Thu Jul 30, 2009 7:53 am
by DF:FD
you see your hids they look really nice what are they 6000k or 8000k

and i want to get the led lights you have they look great!! are you 100% sure they the right ones lol i dont want to mess up!

just went on the website theres so many :shock: which ones were yours the ones which has 3 yellow squares on each side or 6...the 6 looked to big :? and what colour tone i liked yours warm white cool white blue???

thanks

Re: CB's 9n progress thread.

Posted: Thu Jul 30, 2009 5:29 pm
by captainbeyond88
DF:FD wrote:you see your hids they look really nice what are they 6000k or 8000k

and i want to get the led lights you have they look great!! are you 100% sure they the right ones lol i dont want to mess up!

just went on the website theres so many :shock: which ones were yours the ones which has 3 yellow squares on each side or 6...the 6 looked to big :? and what colour tone i liked yours warm white cool white blue???

thanks
mine are 8000k and i really like them. they are quite blue at night hehe
i think those are the right size but I recommend taking the bulbs out your car and measuring them if you want to be sure. it only takes 2 mins.
I used the 6 LED ones. for the interior it is perfect but it is a tight squeeze for the no plate holders. mine are in sitting kinda diagonally inside the festoon but they do fit, just. mine are all the cool white colour. the blue is REALLY blue...and looks tacky imo.
hope this helps
m

Re: CB's 9n progress thread.

Posted: Thu Jul 30, 2009 11:55 pm
by DF:FD
8000ks o damn 6000k more for me the feds bit tyt so your saying the leds with the 6 yellow squares per side? defo gna have to get out the bulbs and have a look myself will get the cool white then as you say

Re: CB's 9n progress thread.

Posted: Sun Aug 02, 2009 6:59 pm
by DF:FD
are these the correct ones

http://www.ultraleds.co.uk/42mm-leds-fe ... f77f6329f7

the same both in a 37 and a 42 for inside and numberplate?