Rogo's 6n2 GTI / just fitted some vr6 leathers
Re: My New Little Toy / Ongoing Progress Thread
Nice mate! VR interiors are lush, is it leather?
- rogo-24-84
- Getting There!
- Posts: 57
- Joined: Sat Jan 28, 2012 5:47 pm
- Location: Oxford
Re: My New Little Toy / Ongoing Progress Thread
no unfortunately not, just black and grey cloth, still nice and alot lighter than leathers
also scraped the vr6 lump idea and looking into a 1.8t now, from what i hear there not that bad to get in...
also scraped the vr6 lump idea and looking into a 1.8t now, from what i hear there not that bad to get in...
My New Little Toy / Ongoing Progress Thread
Car looks good man.
Re: My New Little Toy / Ongoing Progress Thread
Let me know of you do do the 1.8t lump cos that's gonna be my last ever thing I do to mine, think it'll fly with it in;-)
- rogo-24-84
- Getting There!
- Posts: 57
- Joined: Sat Jan 28, 2012 5:47 pm
- Location: Oxford
Re: My New Little Toy / Ongoing Progress Thread
Yh if it goes ahead there will be a big build thread on here don't worry
- rogo-24-84
- Getting There!
- Posts: 57
- Joined: Sat Jan 28, 2012 5:47 pm
- Location: Oxford
Re: My New Little Toy / Ongoing Progress Thread
Got My BBS badges thro yesterday, look lovely i think..!! although the wheels need a clean
and a few other bits i did yesterday,
and a few other bits i did yesterday,
- HD9POLOGTi
- Bronze Member
- Posts: 216
- Joined: Mon Nov 15, 2010 12:03 am
- Location: Huddersfield
My New Little Toy / Ongoing Progress Thread
Loving the wheels mate are they the dare bbs reps?? Been looking to buy them in 15 but looking at the 16 make me think otherwise what et are they??
-
- Bronze Member
- Posts: 233
- Joined: Thu Aug 13, 2009 10:04 pm
- Drives: 6R GTI
- Location: Durham
Re: My New Little Toy / Ongoing Progress Thread
Car looks ace, wheels look the dogs & luvin the dice valve caps I think i'll buy some too see how they look on mine
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: My New Little Toy / Ongoing Progress Thread
Looking good mate the little touches make all the difference
- rogo-24-84
- Getting There!
- Posts: 57
- Joined: Sat Jan 28, 2012 5:47 pm
- Location: Oxford
Re: My New Little Toy / Ongoing Progress Thread
lenso's dude 16" 7.5j
and i had the bbs badge's made for me
dice caps were only like 6 quid and i got dice door pins for about a fiver, althought they dont fit direct i had to fill them with aridite and screw them onto the original metel pins them about 1mm to fat so dont screw up without being modified.....
ULTIMATE DUBS IS LESS THAN 2 WEEKS AWAY
and i had the bbs badge's made for me
dice caps were only like 6 quid and i got dice door pins for about a fiver, althought they dont fit direct i had to fill them with aridite and screw them onto the original metel pins them about 1mm to fat so dont screw up without being modified.....
ULTIMATE DUBS IS LESS THAN 2 WEEKS AWAY
- HD9POLOGTi
- Bronze Member
- Posts: 216
- Joined: Mon Nov 15, 2010 12:03 am
- Location: Huddersfield
My New Little Toy / Ongoing Progress Thread
Ahhh 7.5j been having a real dilema choosing right size keep changing me mind between 9x16 and 15x8 by the looks of yours 7.5 is just rightrogo-24-84 wrote:lenso's dude 16" 7.5j
and i had the bbs badge's made for me
dice caps were only like 6 quid and i got dice door pins for about a fiver, althought they dont fit direct i had to fill them with aridite and screw them onto the original metel pins them about 1mm to fat so dont screw up without being modified.....
ULTIMATE DUBS IS LESS THAN 2 WEEKS AWAY
Looking sweet anyway
- rogo-24-84
- Getting There!
- Posts: 57
- Joined: Sat Jan 28, 2012 5:47 pm
- Location: Oxford
Re: My New Little Toy / Ongoing Progress Thread
You will defo not get 9's on there without destroying the arches dude!!
There 7.5j et38 with slightly stretched tires and 20mm spacers on the rear and 10mm up front, arches have been rolled as much as they can be without wrecking the look or paint,.
In my opinion it's the perfect set up, and it's still allowing me to wind it down abit more without and rubbing atall!!
That's just my view tho
There 7.5j et38 with slightly stretched tires and 20mm spacers on the rear and 10mm up front, arches have been rolled as much as they can be without wrecking the look or paint,.
In my opinion it's the perfect set up, and it's still allowing me to wind it down abit more without and rubbing atall!!
That's just my view tho
- rogo-24-84
- Getting There!
- Posts: 57
- Joined: Sat Jan 28, 2012 5:47 pm
- Location: Oxford
Re: Rogo's 6n2 GTI / just fitted some vr6 leathers
i had vr cloth in it but managed to source some vr leathers cheap so fitted them instead
here's some pics:
AND A FEW MORE PICS I TOOK:
here's some pics:
AND A FEW MORE PICS I TOOK:
Rogo's 6n2 GTI / just fitted some vr6 leathers
These are proper minters! Really like them!
- rogo-24-84
- Getting There!
- Posts: 57
- Joined: Sat Jan 28, 2012 5:47 pm
- Location: Oxford
Re: Rogo's 6n2 GTI / just fitted some vr6 leathers
if your gunna go for some mate make sure you get 3dr fronts but 5dr rears!! as the 3dr rears dont have any headrests..., couldnt belive how simple the rear conversion was to do, took about 25-30 mins to swap both lots and clean them up, just look the nuts in there i think gunna have the door cards retrimmed in the next few weeks aswell, and my headlining pacel self and a pillers are going black alcantara