You need dash can wires for the cluster, tpms and hba with 7E0
You need new diagnostics can wires to obd2
New powertrain can wires, splice i.e. with G85
New lin to old can wires for lin generator and battery monitoring sensor.
Forever remove the old can gateway and isolate the old wires
In short, everything it has already been said in my topic (a long time ago) and the recent links.
Or maybe you have not read it?
Haha havent read all of it... Only most of it
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Apr 17, 2017 6:34 pm
by ciclo
iichel wrote:
ciclo wrote:
iichel wrote:So comfort can is there already....
You need dash can wires for the cluster, tpms and hba with 7E0
You need new diagnostics can wires to obd2
New powertrain can wires, splice i.e. with G85
New lin to old can wires for lin generator and battery monitoring sensor.
Forever remove the old can gateway and isolate the old wires
In short, everything it has already been said in my topic (a long time ago) and the recent links.
Or maybe you have not read it?
Haha havent read all of it... Only most of it
Hmm... since you are moderator in the Dutch forum (long time ago) you do not pay attention to what really matters ...
I deduce from your previous reply about the CAN for TPMS that you pay no attention to what really matters... in this same page.
By the way, how about your keyless mod? Have you solved the riddle?
I'll explain the question in case you do not pay enough attention:
I do not ask you if others have solved the riddle, I ask you if the riddle has been solved by you.
Between your lack of attention and my bad english we can become the most comical couple in the whole network ...
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Apr 17, 2017 7:03 pm
by giorgiofrattolillo
Hi, are you able to provide me with some help about some headlights please? Having problems with my DTRL. Would message you but i am unsure how as i only joined today. Thanks!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Apr 17, 2017 7:29 pm
by ciclo
Welcome giorgiofrattolillo.
In order to send private messages it is necessary to have at least 10 messages in the forum.
Tell me here what the problem is with your DTRL (DRL ), please specify what type of headlights are. H4 single, H7 twin, Bixenon.
Hmm... GTI with front WRC bumper?
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Apr 18, 2017 1:38 pm
by patil
Master I have ordered the 4 parts you mentioned for passenger side door lock switch mod for my 6R RHD.
I want to know, what size terminals and wires are required for wiring so that I can order. Thanks
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Apr 18, 2017 3:44 pm
by iichel
door lock switch = micro quadlock system, wire diameter 0.35mm2 or larger
0.5mm2 = 000 979 009 E 2x
1 wire holds two crimp connectors
Door connector T28:
Female MCP 1.5 and male MCP 1.5
000 979 025 E and 000 979 020 E, both 1x
Remember, you only lead one wire to the T28, the other two (58d and GND) are in the door wiring harness
0.5mm2 = 000 979 009 E 2x
1 wire holds two crimp connectors
Door connector T28:
Female MCP 1.5 and male MCP 1.5
000 979 025 E and 000 979 020 E, both 1x
Remember, you only lead one wire to the T28, the other two (58d and GND) are in the door wiring harness
Thanks a lot iichel
But according to Master Ciclo's wiring diagram, 2 wires(T28a/11 to T28/14 and T28a/14 to T28/15) lead to door lock switch,
plus other two 58d and GND from door wiring harness as you said.
I can assure you that all the information you need is contained in those links with absolute precision.
First look at the etka the connectors reference of your car. (At the end of the electrical part)
Then look at the Russian link to know which terminals are needed for each type of connector depending on numbers of pins.
It's really simple.
Please understand that it takes me the same time as anyone to do the necessary searches ...
), please specify what type of headlights are. H4 single, H7 twin, Bixenon.
viewtopic.php?f=56&t=58703&start=75#p473025
wow!