Greg's Silver Polo Progress Thread - NOW SOLD!!
-
- Gold Member
- Posts: 669
- Joined: Fri Feb 19, 2010 8:03 pm
- Drives: 2011 Ibis White Audi A3 2.0 TDI Sport
Re: Greg's Silver Polo Progress Thread - Rear End Complete -
Yeh without the badge looks much better there's no need to make a small cutout as it sits just right and don't want to ruin the bumper don't think I'm going to lower as I'm only going to have the car another 15 months before I get alex's GTI
Would rather spend money on a few little bits for the GTI so it's perfect for when I get it
Greg
Would rather spend money on a few little bits for the GTI so it's perfect for when I get it
Greg
-
- Gold Member
- Posts: 669
- Joined: Fri Feb 19, 2010 8:03 pm
- Drives: 2011 Ibis White Audi A3 2.0 TDI Sport
Re: Greg's Silver Polo Progress Thread - Rear End Complete -
Just a new little sticker for my side bump strip
-
- Gold Member
- Posts: 669
- Joined: Fri Feb 19, 2010 8:03 pm
- Drives: 2011 Ibis White Audi A3 2.0 TDI Sport
Re: Greg's Silver Polo Progress Thread - Pedal Box
A couple of weeks ago, i heard a strange creeking noise in my clutch. Got my bro to look at it, and he said the welding on the pedal box had nearly snapped (I hear this is a common problem on polos). Today the pedal box was changed, took a look at the old one and the fracture in the welding was quite bad and close to snapping.
It was a bit fiddly, as the whole steering column had to come off and so did the clocks. There was two bolts which were a bit of a nightmare getting to, but got them off in the end
It's all back together now, and it feels slightly smoother. Now I need a new clutch as my one is nearly worn out, which is going to be sorted in a couple of weeks.
All thanks to my bro
Heres a couple of pics:
It was a bit fiddly, as the whole steering column had to come off and so did the clocks. There was two bolts which were a bit of a nightmare getting to, but got them off in the end
It's all back together now, and it feels slightly smoother. Now I need a new clutch as my one is nearly worn out, which is going to be sorted in a couple of weeks.
All thanks to my bro
Heres a couple of pics:
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Greg's Silver Polo Progress Thread - Pedal Box Welding
what an effort that looks to take out and change, lucky you spotted it before it got any worse !
glad its sorted mate
car looking mint btw
glad its sorted mate
car looking mint btw
- cornishdrummer
- Gold Member
- Posts: 803
- Joined: Sat Jan 01, 2011 5:55 pm
- Location: Kernow - Drives: Black 6n2 Polo 1.0
Re: Greg's Silver Polo Progress Thread - Pedal Box Welding
Rather you then me
Re: Greg's Silver Polo Progress Thread - Pedal Box Welding
My clutch pedal has been creaking and sqeeking for ages. I havnt really found it to be a major annoyance.
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Greg's Silver Polo Progress Thread - Pedal Box Welding
If its the pedal box and the weld snapped, then itll be a major annoyance lol!
Re: Greg's Silver Polo Progress Thread - Pedal Box Welding
I would imagine so! But since, it has been to a garage a few times for services and MOT's and they have failed to notice it being a problem..
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Greg's Silver Polo Progress Thread - Pedal Box Welding
Thats because most garages dont know what it is - its a specialist thing lol
-
- Gold Member
- Posts: 669
- Joined: Fri Feb 19, 2010 8:03 pm
- Drives: 2011 Ibis White Audi A3 2.0 TDI Sport
Re: Greg's Silver Polo Progress Thread - New clutch
After being put off for as long as possible, my clutch finally decided it needed replacing. It's just been gradually getting worse and worse with a really irritating creeking noise causing it to be really stiff.
My bro very kindly offered to do it for me on Saturday taking roughly 5 hours. The drive of the car now is so good compared to how it was. Some of the bolts were a nightmare to screw back up, but we got there in the end and all is good!
It was the original clutch - 11 years old, 64,500 miles so about average really.
Need my rear tyres replacing next, and thats about it for maintenance atm.
Got no plans for it in the next year, its staying exactly how it is now
Cheers, Greg
My bro very kindly offered to do it for me on Saturday taking roughly 5 hours. The drive of the car now is so good compared to how it was. Some of the bolts were a nightmare to screw back up, but we got there in the end and all is good!
It was the original clutch - 11 years old, 64,500 miles so about average really.
Need my rear tyres replacing next, and thats about it for maintenance atm.
Got no plans for it in the next year, its staying exactly how it is now
Cheers, Greg
Re: Greg's Silver Polo Progress Thread - New clutch
Wish i had a brother who could always fix my car..!
Looking really nice though dude. Love the 6N2 sticker.
Looking really nice though dude. Love the 6N2 sticker.
- cornishdrummer
- Gold Member
- Posts: 803
- Joined: Sat Jan 01, 2011 5:55 pm
- Location: Kernow - Drives: Black 6n2 Polo 1.0
Re: Greg's Silver Polo Progress Thread - Carbon vinyling
Loving this, it looks great.gregperkins wrote:Well last couple of days i've been carbon vinyling bits and pieces on the car Iv done the surround of my head unit, the surround of my dials, door pin surrounds, and the inserts of my rear vw badge
Couple of pics
Any comments/criticism welcome
-
- Gold Member
- Posts: 669
- Joined: Fri Feb 19, 2010 8:03 pm
- Drives: 2011 Ibis White Audi A3 2.0 TDI Sport
- cornishdrummer
- Gold Member
- Posts: 803
- Joined: Sat Jan 01, 2011 5:55 pm
- Location: Kernow - Drives: Black 6n2 Polo 1.0
Re: Greg's Silver Polo Progress Thread - New clutch
How hard was it to do ?
-
- Gold Member
- Posts: 669
- Joined: Fri Feb 19, 2010 8:03 pm
- Drives: 2011 Ibis White Audi A3 2.0 TDI Sport
Re: Greg's Silver Polo Progress Thread - New clutch
Not to tricky, but you just need the patience haha!