SELL UP!

[benmkiv]

Which bulbs are in your headlight rings??? Those rear lights are hell clear led rears with a red spray tint a across some of them.

[MJS_93]

Got Plates from DemonPlates, Got the Carbon 3D ones

I want some 3D resin plates (just the plain black one) but I have read that they're illegal despite the website claiming that they are legal.

[SolidZeus]

Which bulbs are in your headlight rings??? Those rear lights are hell clear led rears with a red spray tint a across some of them.

There Angel headlight replacements from CrazyLEDS.com, although I originally ordered white ones, these turned up but I'm not too fused, will probably get White in the near year for a change, and I've been looking everywhere for clear LED rear lights but there just a rare now

[SolidZeus]

Got Plates from DemonPlates, Got the Carbon 3D ones

I want some 3D resin plates (just the plain black one) but I have read that they're illegal despite the website claiming that they are legal.

Oh, well They look clear enough to read and because I got new LED plate lights they're illuminated enough to read when I'm driving but it never crossed me if they're illegal, I'll look into it, thanks

[x-luke-b-x]

Yeah those lights are really rare now, i managed to grab a pair of clear led black ones off club polo, straight swap for standard lights your best bet is to look on eBay and keep checking the for sale sections on forums. how much was your lights they look sweet now you have changed the led rings?

[SolidZeus]

Hey guys, few issues I need a hand with;

My rear LH light has a dimmed light, I've changed the bulb but its still Dim
When I press my clutch I get a loud Tapping/knocking sound, but I can still engage Gear and drive normally
And my main beam lights aren't working at all, The fuse is fine, and the bulbs are practically new, I've even got a Volt reader out.

[SolidZeus]

Sup guys, Alright changed my Rears for LED's I grabbed off Ebay, There smoked ones.
The Tapping sound when the clutch is pressed has got excessively louder, but I like to let the problem develop so I really know what's wrong I guess. One Mechanic was rabbiting about a seal, Didn't pay much attention after he said £600+ haha

[James.watts95]

alright, been reading your post, and pretty impressed with it man, cars coming along nicely, but was the rclick easy? and how did you fit the electric windows? t

[alexperkins]

I wouldnt let that problem get much worse

You could end up with your clutch turning to dust like my did

It sounds like your release bearing is about to imminently fail.

[SolidZeus]

Got another problem guys, My main beams aren't working;
I've checked the fuse, changed the switch and still no feed to the main beam, But my high beams and Halo's light up

Anyone know what this could be?

Cheers

[alexperkins]

By main beams I assume you mean dipped beams

Check both bulbs, and check all the fuses. Theres various fuses that are linked into the headlight system.

[SolidZeus]

By main beams I assume you mean dipped beams

Check both bulbs, and check all the fuses. Theres various fuses that are linked into the headlight system.

Yeah, Sorry

I used this as a reference http://uk.answers.yahoo.com/question/in ... 057AAUCL4l

And checked all fuses light related

[alexperkins]

I would check every single fuse regardless of function

When you say new switch - do you mean headlight switch?

When did they stop working? Did anything significant happen?

[SolidZeus]

I would check every single fuse regardless of function

When you say new switch - do you mean headlight switch?

When did they stop working? Did anything significant happen?

Alright i'll check all fuses, and Yeah I changed my light switch

I had a little trouble before they completely stopped working, and it was when I switch the lights on, it had a 2-3 second delay instead of instant.

[alexperkins]

Thats a bit strange. Suggests a wiring problem somewehre