UK-POLOS.NET - THE VW Polo Forum

Hello !

On ETKA I was loocking for the wiring support clipsed into the roof of the Polo 6C (over the passenger/conductor) but impossible to found them on ETKA even after 2-3h of searching.

One looks like this: and the other, more "classic" Thank your for your help

Le_Combattant wrote: Mon Jun 09, 2025 2:39 pm Hello !

On ETKA I was loocking for the wiring support clipsed into the roof of the Polo 6C (over the passenger/conductor) but impossible to found them on ETKA even after 2-3h of searching.

One looks like this:
pcto.jpg

and the other, more "classic"
37nh.jpg

Thank your for your help

Try using etka- common parts section of catalog. There are many clips and you have to go one by one. Only issues on these free etkas pictures arent available :/

amer6R wrote: Wed Jun 11, 2025 7:49 am

Le_Combattant wrote: Mon Jun 09, 2025 2:39 pm Hello !

On ETKA I was loocking for the wiring support clipsed into the roof of the Polo 6C (over the passenger/conductor) but impossible to found them on ETKA even after 2-3h of searching.

One looks like this:
pcto.jpg

and the other, more "classic"
37nh.jpg

Thank your for your help

Try using etka- common parts section of catalog. There are many clips and you have to go one by one. Only issues on these free etkas pictures arent available :/

Yes It's what I did but even here, impossible to find something, or maybe I missed it.
On a paper, I noted all part number without any picture and I made research on ETKA to find them (no matter the car, just to see it's shape) but no.

I have to see, if by removing some parts (sunshade, screw) I can lower the headliner enought to get access on the upper part to see if there is any part number.

This one is similar, but shorter
WHT004916
4B0 971 848
N 91115901
6Q0971848P
1T0971930A
1J0971445C

Please check these with underline. The round hole one i cant seem to find identical (your has a bend)

is it perhaps 3B0971848F?

Unfortunately nop

Almost the same shape but the lenght is too short.

Le_Combattant wrote: Wed Jun 11, 2025 7:46 pm Unfortunately nop

Almost the same shape but the lenght is too short.

3d print one and forget about it
( Just use cloth tape, and stick the loom to the body. )
Or get the one without a bend and use heatgun to form the bend.

1K0971930C?
and
6Q0971848P?

iichel wrote: Wed Jun 11, 2025 10:40 pm 1K0971930C?
and
6Q0971848P?

6Q0971848P yeah for the "straight" one
1K0971930C looks almost the same, maybe a revision ?

yeah if this isn't the one then that cable clip can go fck itself

New day, new part I'm looking for.
Man, I'm complaining about IPC (Illustrated part catalog) from Boeing sometimes (I'm aircraft engineer) but the VW's one it total s**t.

This one now:
This metal part is the main bracket for the lower center console.
I don't know what happen when they built my car but:

-the part was slightly bent
and
-they forgot to install 2 screws

This is the main reason for why it was so hard to remove and install. But VW decided to install a little cable holder, white one whith the famouse Xmas tree.
Impossible to remove without destroying it.

And of course, not part number on it.

I know this one, they have been replaced with 4B0971848

iichel wrote: Wed Jul 09, 2025 6:48 pm I know this one, they have been replaced with 4B0971848

Oh man, If it's true I'm gonna give you a kiss.

Those little s**t are pain in the ass to remove.

https://www.youtube.com/watch?v=EJPN69EpoR4&t=14s 🏖

Oooooh it's a nice one

EDIT: even there, impossible to found my previous part request...come on VW !