UK-POLOS.NET - THE VW Polo Forum

hi, im having some problems when coding the 01 module. i dont know what bit to change, i dont get a explanation.
i dont have vcds, im running obd11 so dont know its possible to get it right..

01 Engine
System description: CGGB MM4HV
Software number: 03C906024BJ
Software version: 8997
Hardware number: 03C906024BH
Hardware version: 000


the code im running: 03158851

this is all info im geting from obd11. might have to switch to vcds

This is the most common coding for CGGB:

1
-------------------------------------------------------------------------------
Address 01: Engine Labels: 03C-906-024-BXW.lbl
Part No SW: 03C 906 024 CN HW: 03C 906 024 BH
Component: CGGB MM4HV G 8994
Revision: --H09--- Serial number:
Coding: 0000071
Shop #: WSC 00788 648 00255
VCID: 6CD1B4F24CFC9D7E575-5072

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------

2
-------------------------------------------------------------------------------
Address 01: Engine Labels: 03C-906-024-BXW.lbl
Part No SW: 03C 906 024 BH HW: 03C 906 024 BH
Component: CGGB MM4HV G 8327
Revision: --H09--- Serial number:
Coding: 0000071
Shop #: WSC 00445 210 70264
VCID: 65C1EB5BAF9D8F16F8-515E

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------


Or perhaps this is the procedure:

Go to / click on "Login - 11" or "Coding II".
Enter the activation code: 11463. 'Do it' to save.
The letter G will then appear in the component's readout.

that’s short code. Mine is long code unfortunately.

It's a second login/code. Try it!




(clearer image if you're using the stupidphone)
Good Luck!