Page 6 of 24
Re: my GTI build / engine strip pics on p3 updated 11/10/08
Posted: Fri Mar 27, 2009 1:43 am
by ceedubya
what power are you running now mate
yorks GT TDI sponsor
Posts: 597
Joined: Sun Aug 21, 2005 2:35 pm
i had my polo on the rollers sat 21st and it made 373bhp and 351 lb/ft
Re: my GTI build / engine strip pics on p3 updated 11/10/08
Posted: Fri Mar 27, 2009 7:39 am
by oliverpologti
nice i bet its a animal
Re: my GTI build / engine strip pics on p3 updated 11/10/08
Posted: Fri Mar 27, 2009 2:06 pm
by whitegtipolo
sweet!
Re: my GTI build / engine strip pics on p3 updated 11/10/08
Posted: Fri Mar 27, 2009 6:30 pm
by yorks GT TDI
vlad_pvs wrote:very nice project! can you please tell me how much did the clutch kit cost? thank you, and good luck in the future with your little beast!
i got it from usa was i spec kit payed 475 us but rate was double what it is now
Re: my GTI build / engine strip pics on p3 updated 11/10/08
Posted: Fri Mar 27, 2009 6:31 pm
by yorks GT TDI
ceedubya wrote: what power are you running now mate
yorks GT TDI sponsor
Posts: 597
Joined: Sun Aug 21, 2005 2:35 pm
i had my polo on the rollers sat 21st and it made 373bhp and 351 lb/ft
very nice but she pulls well are you running a diff
Re: my GTI build / engine strip pics on p3 updated 11/10/08
Posted: Sat Mar 28, 2009 5:22 pm
by yorks GT TDI
small update fitted a Vibra-Technics gearbox mount today helps alot more with putting the power down and not more banging off the lights
mot time next month then the fun starts
Re: my GTI build / updated 28/03/09
Posted: Sat Mar 28, 2009 5:46 pm
by Rich_T
whys that yorks?
Re: my GTI build / updated 28/03/09
Posted: Sat Mar 28, 2009 9:52 pm
by yorks GT TDI
Rich_T wrote:whys that yorks?
its no longer under warranty
Re: my GTI build / engine strip pics on p3 updated 11/10/08
Posted: Tue Mar 31, 2009 1:33 pm
by ceedubya
yorks GT TDI wrote:ceedubya wrote: what power are you running now mate
yorks GT TDI sponsor
Posts: 597
Joined: Sun Aug 21, 2005 2:35 pm
i had my polo on the rollers sat 21st and it made 373bhp and 351 lb/ft
very nice but she pulls well are you running a diff
its a proper handful now
all good fun tho
on its 1st run it hit 395bhp but was wheel spinning (in 5th) and couldnt be counted
on the 2nd run it got upto 373 bhp and this happened = game over
the operator said it would have made 380 bhp if the pipe never popped
i have a peloquin diff and spec stage 2+ clutch and solid alloy flywheel
Re: my GTI build / updated 28/03/09
Posted: Tue Mar 31, 2009 8:33 pm
by Rich_T
mad stuff mate!! lovin it
Re: my GTI build / updated 28/03/09
Posted: Wed Apr 01, 2009 1:16 pm
by whitegtipolo
SEXUAL!! Thats amazing power from a polo but , cant see it being usable!
Re: my GTI build / updated 28/03/09
Posted: Wed Apr 01, 2009 1:49 pm
by ceedubya
whitegtipolo wrote:SEXUAL!! Thats amazing power from a polo but , cant see it being usable!
i can nearly lay full power down in 2nd with the diff doing its job
(1st gear in my 6 speed box is pointless)
0-20 = crap / 20 - 160+ = game on
Re: my GTI build / updated 28/03/09
Posted: Wed Apr 01, 2009 6:26 pm
by yorks GT TDI
great stuff shame about the pipe but looks like its the cheap stuff not sure how the 5 speed will cope with the power but will be finding out soon
just payed the deposit for the kit will have to wait for the manifold the be made
will be runing this manifold but with no external waste gate take off as it will be very close to the A/C pipes with a nice GT30 sat on top of it will be fun
will be a one of kit with full 3" off the turbo to the back and a single pass intercooler
think im going to have the mani and down pipe ceramic coated
Re: my GTI build / updated 01/04/09 now booked for the turbo
Posted: Wed Apr 01, 2009 7:50 pm
by KennyPOLO_Gti
Re: my GTI build / updated 01/04/09 now booked for the turbo
Posted: Wed Apr 01, 2009 8:44 pm
by yorks GT TDI
thanks kenny
i carnt wait too i drive it everyday only did with out it when i was doing the engine but it does go on a ramp few time a month just cos i can
have to wait on the manifold to be made and for him to get all the parts too also the guy is doing a A3 at the min so should be dropping it off end of the month and around two weeks build time because of the intercooler but i may run longer